Abstract:Unraveling the microstructural heterogeneity is an important issue to understand the physical and mechanical properties of metallic glasses. Structural relaxation below the glass transition temperature Tg and cold rolling at ambient temperature are effective ways to tune the state within the potential energy landscape of metallic glasses, modifying the microstructural heterogeneity. With the help of nanoindentation technique, by scrutinizing the local reduced modulus and hardness of a typical Zr50Cu40Al10 metallic glasses in different energy states (from structural relaxed state to rejuvenated state), we demonstrate that the enhancement of microstructural heterogeneity plays an important role in tailoring the mechanical behavior. The internal friction coefficient is obtained by fitting the experimental load-displacement curves with finite element simulation. It is found that internal friction coefficient decreases with the increase of concentration of flow defects. The stress exponent obtained from the creep stage shows a strong dependence on the structural state of metallic glasses. Effects of structural relaxation and rejuvenation on the structural state are rationalized in terms of the relative flow defects concentration. Finally, the statistics of discrete displacement bursts during the deformation process were probed. We find that the displacement bursts behavior is sensitive to the structural energy state (microstructural heterogeneity). The displacement bursts phenomenon changes from obvious (relaxed state) to unapparent behaviors (rejuvenated state). By given a physical schematic, the correlation between the displacement bursts size and the shear band size in the local plastic zones is well established, which will lead to a deeper understanding of the rejuvenation-induced plasticity of metallic glasses.

Significant tensile ductility induced by cold rolling in Cu47.5Zr47.5Al5 bulk metallic glass

Unraveling the microstructural heterogeneity and plasticity of Zr<sub>50</sub>Cu<sub>40</sub>Al<sub>10</sub> bulk metallic glass by nanoindentation

Ultrasonic excitation induced nanocrystallization and toughening of Zr<sub>46.75</sub>Cu<sub>46.75</sub>Al<sub>6.5</sub> bulk metallic glass

Microstructure and Microhardness Evolutions of Cu47.5zr47.5al5 Bulk Metallic Glass Processed by Rolling

Pronounced Ductility in CuZrAl Ternary Bulk Metallic Glass Composites with Optimized Microstructure Through Melt Adjustment

Microstructural heterogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites

Effect of Rolling on the Microstructure and Mechanical Property of Zr52.5Cu17.9Ni14.6Al10Ti5 Bulk Metallic Glass

Criteria for tensile plasticity in Cu–Zr–Al bulk metallic glasses

High temperature deformation behaviors of the Zr 63.36 Cu 14.52 Ni 10.12 Al 12 bulk metallic glass

Deformation-strengthening During Rolling Cu60Zr20Ti20 Bulk Metallic Glass

Effect of Cold Rolling on Glass Transition of Zr55Al10Ni5Cu30 Bulk Metallic Glass

Unusual Room Temperature Ductility of A Zr-Based Bulk Metallic Glass Containing Nanoparticles

Shear Band Evolution and Hardness Change in Cold-Rolled Bulk Metallic Glasses

Effect of Pre-Existing Shear Bands on the Tensile Mechanical Properties of A Bulk Metallic Glass

Influence of cold-rolling on the hardness of Zr65Al7.5Ni10Cu17.5 bulk metallic glass

Microstructure and mechanical property of Zr 65 Al 7.5 Ni 10 Cu 12.5 Ag 5 bulk metallic glass subjected to rolling

Enhanced Ductility in a Zr65Cu15Al10Ni10 Bulk Metallic Glass by Nanocrystallization During Compression

Microstructure evolution and mechanical properties of Cu46Zr47Al7 bulk metallic glass composite containing CuZr crystallizing phases

Crystallization Behavior of Zr55Al10Cu30Ni5 Bulk Metallic Glass Rolled at Room Temperature

Microstructural evolution during annealing and rolling Zr52.5Cu17.9Ni14.6Al10Ti5 bulk metallic glass

Mechanically Driven Phase Separation and Corresponding Microhardness Change in Cu60Zr20Ti20 Bulk Metallic Glass