Abstract:Mg-6.75Zn-0.57Zr-0.4Y-0.18Gd (wt.%) sheet with typical basal texture was produced by cross rolling and annealing. Room temperature tensile tests were subsequently conducted along rolling direction (RD), transverse direction (TD), and diagonal direction (RD45). Deformation mechanism and orientation evolution during the tension were investigated by quasi-in-situ electron backscatter diffraction observation and in-grain misorientation axis analysis. The results indicate that the activation of deformation mechanism mainly depends on the initial grain orientation. For RD sample, prismatic 〈a〉 slip plays an important role in the deformation of grains with 〈0001〉 axis nearly perpendicular to the RD. With the 〈0001〉 axis gradually tilted towards the RD, basal 〈a〉 slip becomes the dominant deformation mode. After the tensile fracture, the initial concentrically distributed {0001} pole is split into double peaks extending perpendicular to the RD, and the randomly distributed {101¯0} pole becomes parallel to the RD. The evolution in {0001} and {101¯0} poles during tension is related to the lattice rotation induced by basal 〈a〉 slip and prismatic 〈a〉 slip, respectively. TD and RD45 samples exhibit similar deformation mechanism and orientation evolution as the RD sample, which results in the nearly isotropic mechanical properties in the annealed cross-rolled sheet.

Shear Band Evolution and Hardness Change in Cold-Rolled Bulk Metallic Glasses

Effect of Pre-Existing Shear Bands on the Tensile Mechanical Properties of A Bulk Metallic Glass

Microstructure and Microhardness Evolutions of Cu47.5zr47.5al5 Bulk Metallic Glass Processed by Rolling

Initiation and Evolution of Shear Bands in Bulk Metallic Glass under Tension—an in Situ Scanning Electron Microscopy Observation

The Pitting Corrosion Behavior of Shear Bands in A Zr-Based Bulk Metallic Glass

Deformation-strengthening During Rolling Cu60Zr20Ti20 Bulk Metallic Glass

Mechanically Driven Phase Separation and Corresponding Microhardness Change in Cu60Zr20Ti20 Bulk Metallic Glass

Evolution of Shear Bands in the Structure of a Zirconium-Based Amorphous Alloy during Rolling at Different Temperatures

Microstructure and Stored Energy Evolutions During Rolling of Cu60Zr20Ti20 Bulk Metallic Glass

Effect of shear bands initiated in the pre-yield region on the deformation behaviour of Zr-based metallic glasses

Effect of cold rolling on the serrated flow behavior of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass during nanoindentation

Hardening overwhelming softening in Ti-based metallic glass composites upon cold rolling

Characterization of Plastic Deformation in CuZr Metallic Glasses Subjected to the Rolling Process

Strength Softening at Shear Bands in Metallic Glasses

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Effect of Rolling Deformation on the Microstructure of Bulk Cu60Zr20Ti20 Metallic Glass and Its Crystallization

Effect of cold rolling on microstructure and mechanical properties of pure Zr

Insights into the evolution of texture and mechanical properties during warm rolling and annealing of Mg–2Zn-0.5Ca alloy

Deformation mechanism, orientation evolution and mechanical properties of annealed cross-rolled Mg-Zn-Zr-Y-Gd sheet during tension

Tailored hardening of ZrCuAl bulk metallic glass induced by 2D gradient rejuvenation

Work Toughening Effect in Zr41Ti14Cu12.5Ni10Be22.5 Bulk Metallic Glass