Abstract:In order to provide technical parameters for industrial model test,methylaluminoxane (MAO) is used as co-catalyst,ethylene/1-hexene copolymerization reaction is carried out catalyzed by CpCN-CGC in n-heptane.The effects of temperature,ethylene pressure,ratio of aluminum to zirconium,hydrogen pressure,and the concentration of 1-hexene on the catalytic behavir and polymer's properties are also studied.It is found that the catalytic activity increase first and then reduce as the temperature increase from 100 to 140 ℃,but the molecular weight of polymer decrease continuously.When the pressure of hydrogen increased from 0.1 to 0.8 MPa,the similar situations happen again.When the pressure of ethylene increase from 0.4 to 1.8 MPa,the catalytic activity increase first and then reduced but the molecular weight of polymer increase contuinually.However,when the ratio of AL/Zr augmented from 500 times to 1 000 times,the catalytic activity increase contuinually but the molecular weight of polymer tends to decrease in general.The optimum technological conditions are obtained:catalyst dosage is 10 μmol,the ratio of Al/Zr =700,polymerization temperature is 110 ～120 ℃,the pressure of ethylene is 1.2 ～1.4 MPa,the dosage of 1-hexene is 20 mL,and the polymerization time is 30 min,as a result,the catalytic activity reaches up to 106 g/(mol-Zr · h) and the insertion of 1-hexene in copolymer reaches up to 8.34％.The copolymer is characterized by 13C NMR,DSC and GPC,and the dyad and triad distribution and number-average sequence length of these copolymers are quantitatively determined,and found that there are many types branch chain in polymer and the mechanism was offered,however,it is also found there are alternating copolymer HEHE fragment exists in copolymer.

Study on copolymerization of ethylene/1-hexene catalyzed by a novel polystyrene-supported metallocene catalyst

Engineering Ethylene/1-Hexene Copolymers from Ethylene Stock with a Model-Guided Catalyst Feeding Policy

STUDIES ON BULK SYNDIOTACTIC POLYMERIZATION OF STYRENE CATALYZED BY METALLOCENE

Effect of Catalysts Supporting on Tandem Polymerization of Ethylene Stock in Synthesis of Ethylene-1-Hexene Copolymer

Ethylene polymerization with metallocene/late transition metal combined catalysts

Study on ethylene (co)polymerization and its kinetics catalyzed by a reversible crosslinked polystyrene-supported metallocene catalyst

Tandem Action of Sns-Cr and Cgc-Ti in Preparation of Ethylene-1-Hexene Copolymers from Ethylene Feedstock

ETHYLENE POLYMERIZATION WITH CORE-SHELL ZIEGLER-NATTA HYBRID CATALYSTS

Advanced Catalyst Technology for Broad/Bimodal Polyethylene, Achieved by Polymer-Coated Particles Supporting Hybrid Catalyst

High Temperature High Pressure Tandem Polymerization of Ethylene for Synthesis of Ethylene‐1‐Hexene Copolymers from Single Reactor with SNS‐Cr and CGC‐Ti Catalysts

Novel polystyrene-supported zirconocene catalyst for olefin polymerization and its catalytic kinetics

Influence of Cocatalyst on the Copolymerization of Ethylene and Styrene Catalyzed by N-Catalyst

Copolymerization of Ethylene with 1‐hexene Promoted by Novel Multi‐chelated Non‐metallocene Complexes with Imine Bridged Imidazole Ligand

Study on Ethylene/1-Hexene Copolymerization Catalyzed by Α-Diimine Nickel Catalysts with Different Ligands

Impact Properties of Metallocene-Catalyzed Ethylene-Alpha-Olefin Copolymers

Synthesis and Characterization of Copolymer of Ethylene and 1-Hexene by Carbon Bridge CpCN-CGC

Study on the Structure and Property of Metallocene Ethylene/1-Heptene and Ethylene/1-Octene Copolymers

Preparation and Characterization of Novel Polyethylene Supported Metallocene Catalysts

Terpolymerization of Ethylene with Hexene and Styrene Derivatives by Half-Sandwich Scandium Catalyst

Copolymerization of ethylene and 1-dodecene catalyzed by novel low-Ti-loading Ziegler–Natta catalysts and their microstructures

(Co)polymerization of Ethylene Via Nonmetallocene Catalysts with Diphenyl Phosphoroso Schiff‐base Ligand