Abstract:Abstract Ship–bridge collision is a common type of accident in bridge engineering which could cause heavy casualties and economic losses. To ensure the safety of both the ships and bridges during collision, a novel steel box-soft body combination was proposed in this work. The time history curves of the impact force of three downscaled facility specimens were obtained through the horizontal impact test. The influence of the steel box web spacing and the existence of the anti-collision facilities on the ship collision force reduction rate was investigated. The collision failure modes of ship bow and the anti-collision facilities, as well as the energy absorption behavior of the facility were analyzed. Based on ANSYS/LS-DYNA finite element (FE) analysis software, the nonlinear numerical models of the anti-collision facilities were generated. The analysis results show that the proposed anti-collision facility can not only greatly reduce the ship impact force, but the bow damage as well. The densified steel box web can improve the anti-collision performance of the whole anti-collision facilities to a certain extent. Compared with the direct impact on the steel plate, the maximum reduction rate of peak force of the proposed facility can be achieved to be 31.07%. The anti-collision facilities deformation energy absorption accounts for more than 70% of the total energy, which shows that the facility is able to absorb most of the energy and protect the bow. The FE simulation results coincide with the experimental outcomes, indicating the acceptable accuracy of the FE models.

Analysis and Test of Shock Response of an Anti-impact Chair

Shock Response Analysis of a Ship Power Shafting System

Simulation of impact load on ship-platform collision

Tests and Evaluation on Shipboard Personnel Anti-Shock Shoes

An analytical method for evaluating the dynamic response of plates subjected to underwater shock employing Mindlin plate theory and Laplace transforms

Dynamic parameters of multi-cabin protective structure subjected to low-impact load – Numerical and experimental investigations

Analysis of damage to ship personnel in different seated postures by near-field underwater explosions

Impact-response analysis of the system composed of critical component and EPE cushion

Centrifuge Experiment and Numerical Analysis of an Air-Backed Plate Subjected to Underwater Shock Loading

Tests and evaluation for personnel anti-shock tiles based on dummy shock response

A Novel Efficient Method to Evaluate the Dynamic Response of Laminated Plates Subjected to Underwater Shock

Impact Response of a Double-Bottom Structure with High and Penetrated Girders and Floors

A new analytical model to evaluate ship side collisions with large indentation considering interaction effects between structural components

Impact test and numerical simulation of typical sub-cargo fuselage section of civil aircraft

Protection Performance Simulation and Anchoring Optimization of Seat Safety Belts of Vehicle under Vertical Intensive Shock

Evaluation of a novel steel box-soft body combination for bridge protection against ship collision

Dynamic Analysis Model of Partly Buried Framed Structure Subjected to Impact of Low-Velocity Moving Ship

Nonlinear similarity characterisation and validation of dynamic response of ship stiffened plate structure under explosion load impacts

Investigation of Risk Factors Affecting Injuries in Reclining Seat under Frontal Impact

Comparative analysis of blast load transfer and structural damage in multi-cabin structures during air and underwater explosions

Analysis and Improvement for Key Parts of Car Based on Frontal Crashworthiness Simulation