Abstract:cushion property of outer packaging box is neglected in the cushion design of packaging system,so it is difficult to obtain reasonable structures to protect products from damage.To study the influence of cushion property of outer packaging box on the product packaging system,firstly,the static experiments were conducted to determine the static constitutive models for honeycomb paperboard of which outer packaging box is made and cushion material expanded polyethylene,and then the dynamic experiments were performed to obtain their dynamic constitutive relationship.Secondly,the impact compression model for expanded polyethylene in series with honeycomb paperboard was built,and relevant solving method was introduced.Finally,based on two requirements: 1.Response acceleration of the products should be smaller than the allowable value and 2.Material consumption of polyethylene should be minimized,the optimal objective function was proposed for expanded polyethylene in series with honeycomb paperboard and its solution steps were presented,then the calculation reliability was proved by the comparisons between calculated results and experimental data.The numerical examples we cited indicate that an over-conservative design is obtained when the contribution of the honeycomb paperboard material is not taken into account,that is,the inclusion of the effects of the shock absorbing characteristics for honeycomb paperboard in the design leads to significant savings in cushion material volume.The ideas in this paper can provide guidance for other serial packaging systems,and it is an effective way for avoiding overuse of cushion materials.

Impact-response analysis of the system composed of critical component and EPE cushion

Cushioning properties of two-layered cushioning structure stacked by honeycomb and calcium plastic board subj ected to quasi-static compressive loadings

Impact Responses of Composite Cushioning System Considering Critical Component with Simply Supported Beam Type

Drop Impact Analysis of Packaging System with Bar Type Elastic Critical Components

Nonlinear Dynamic Analysis of Series Cushioning System Made with Expanded Polyethylene and Corrugated Paperboard

Impact Response of Series Cushioning System and Structure Optimization Analysis

Impact Analysis and Absorber Design for Collision Protection of Part-Buried Structures

Drop Impact Analysis of Cushioning System with an Elastic Critical Component of Cantilever Beam Type

Numerical Study of CFRP-Bonded Pressure Pipes Subject to Impact Load

Elasto-plastic impact model and experimental study of new absorber for structural collision protection

Drop Impact Analysis on Item Packaging System with Beam Type Elastic Critical Component

Optimization Design of MDOF Package Cushioning System Made of Polyethylene

Finite element analysis (FEA) applied to polyethylene foam cushions in package drop tests

Establishment of buffer dynamic model for polyethylene foam cushion

Study on Shock Response of Cushion Packaging System Based on Combined Model Using Hyperbolic Tangent and Tangent Functions with Consideration of Rotation Effect

Finite Element Analysis for Dynamic Response of Cushioning System Made out of Honeycomb Paperboard and Foam

Virtual mass method for solution of dynamic response of composite cushion packaging system

The shock response of hyperbolic tangent and tangent comprehensive model on cushion system considering rotary motion

Variational Iteration Method for Analysis of Dropping Shock Response of EPE Cushion System

Shock response and finite element analysis of critical components with cantilever beam type under action of a rectangular acceleration pulse

Study on Drop Impact of Packaging System Considering the Cushioning Action of Honeycomb Paperboard Box