Abstract:Silica/titania/ÿ-Glycidoxypropyltrimethoxysilane composite materials processed by the sol-gel technique were studied for photonic applications. Waveguide thin films with thickness more than 1.7 µm were prepared by the sol-gel spin coating technique and low temperature heat treatment from this high titanium content composite materials. The films were analyzed by atomic force microscopy (AFM), ellipsometry, differential thermal analysis (DTA), thermal gravimetric analysis (TGA), UV-visible spectroscopy (UV-VIS), and Fourier transform infrared (FT-IR) spectroscopy. It was observed that the film becomes thinner as the titanium contents increase. A change of the refractive index through the range 1.52–1.61 at the optical wavelength of 633 nm was achieved by varying the molar ratio between silica and titanium. A dense, low absorption, and high transparency in the visible range waveguide films could be obtained at a low temperature. It was also noted that organic compounds in the film would decompose in the temperature range from 200°C to 480°C. Accordingly, purely inorganic silica-titania films with a thickness of about 0.7 µm could also be obtained by a single-coating process, when the film was baked at a temperature of 500°C or higher. The waveguides properties and photonic applications of the composite material solgel films were also investigated.

Sol–gel fabrication of GeO2/ormosils organic–inorganic hybrid material channel waveguides

Preparation and Spectroscopic Studies of Sol-Gel Derived GeO2/organically Modified Silane Hybrid Materials for Optical Waveguides

Effects of Germanium Content on Sol-Gel GeO2/γ-glycidoxypropyltrimethoxysilane Hybrid Planar Waveguides Prepared at Low Temperature

GeO2/organically Modified Silane Sol-Gel Hybrid Organic-Inorganic Films for Photonic Applications

Germania/ormosil hybrid materials derived at low temperature for photonic applications

Sol-gel fabrication and properties of optical channel waveguides and gratings made from composites of titania and organically modified silane

Sol-Gel Derived Titania/γ-Glycidoxypropyltrimethoxysilane and Methyltrimethoxysilane Hybrid Materials for Optical Waveguides

Sol–gel preparation of Ge nanocrystals embedded in SiO2 glasses

Fabrication Of Composite Sol-Gel Optical Channel Waveguides By Laser Writing Lithography

Tio2/Sio2/Ormosil Hybrid Material Planar Waveguides Prepared At Low Temperature By Sol-Gel Processing

Sol-Gel Derived Titaniajormosil Composite Thin Films For Optical Waveguide Applications

Preparation and Characterization of Sol–gel Processed GeO2/methyltrimethoxysilane Hybrid Thin Films

Preparation and characterizations of SiO2/TiO2/γ-glycidoxypropyltrimethoxysilane composite materials for optical waveguides

Waveguide Properties Of Tio2/Ormosil Composite Thin Films Prepared By Sol-Gel Processing On Iii-V Compound Semiconductor Substrates

Structural and optical properties of waveguides of sol-gel deposited ferroelectric PZT(50/50) thin films

The preparation of silica-based SiO2-ZrO2 films as waveguides by sol-gel process

Thermo-optic Properties of Sol-Gel-fabricated Organic–inorganic Hybrid Waveguides

Preparation And Properties Of Organically Modified Sol-Gel Silica/Titania Optical Waveguides

Sol-gel processed silica/titania/ÿ-Glycidoxypropyltrimethoxysilane composite materials for photonic applications

Preparation And Characterizations Of Sio2/Tio2/Gamma-Glycidoxypropyltrimethoxysilane Composite Materials For Optical Waveguides

Fabrication of Sol-Gel-derived Optical Waveguide on InP for Hybridized Photonics Applications