Abstract:Continuous silicon carbide (SIC) fiber-reinforced titanium metal-matrix composites (TMCs ) are potential candidates for high temperature application in jet engines because of their high specific strength and stiffness. However, severe interfacial reactions caused by high temperature manufacture and service have a detrimental effect on the mechanical properties of composites. Furthermore, the phase transition occurred in matrix at elevated temperature is unfavorable to the properties. In this work, the interfacial reaction, matrix phase transformation and thermal stability of SiC/Ti65 composites were investigated. The composites were prepared by the combination of magnetron sputtering and hot isostatic pressing (HIP) method. Matrix-coated precursor wires prepared by sputtering were aligned, degased and encapsulated, then consolidated by HIP. And the densified composites were subjected to long-term thermal exposure at 650, 750, 800 and 900 degrees C respectively. Reaction products and element diffusion of SiCf/ Ti65 composites in different conditions were studied. The results show that the elements diffuse and participate in both interfacial reaction and matrix phase transition during HIP and thermal exposure process. In the as-processed SiCf/Ti65 composites, TIC is the main product of interfacial reaction layer, and (Zr, Nb)(5)Si-4 is the product of matrix phase transition. With the continuous consumption of C-coating layer in the process of thermal exposure, Ti5Si3 and (Zr, Nb)(5)Si-4 form in the interfacial reaction layer, while Ti-3(Al, Sn)C and TiC precipitate in the matrix. The results of thermal stability study indicate a parabolic correlation between interfacial reaction layer thickness and exposure time, and the activation energy of reaction layer growth estimated by Arrhenius equation is 93 kJ/mol. The interface of SiCf/Ti65 composites is stable below 650 degrees C.

Interfacial Reaction and its Effects on Mechanical Property of SiCf/Super α2 Composites

Influence of Reinforcement with Multimodal Distribution on Thermophysical Properties and Fracture Behavior in Al-Si/SiC Composites Infiltrated under Super-Gravity Field

Interfacial Regulation and Fracture Mechanism of Al–Si/SiC Composites Infiltrated under Super-Gravity Field

Interfacial Reactions and Mechanical Properties Studies of C-Coated and C/B4C Duplex-Coated SiC Fiber-Reinforced Ti2AlNb Composites

Effects of interfacial residual stress on mechanical behavior of SiCf/SiC composites

THE INTERFACIAL THERMAL STABILITY AND ELEMENT DIFFUSION MECHANISM OF SiCf/TC17 COMPOSITE

Reactions Mechanism and Mechanical Properties of a SiCf/SiC Joint Affected by Cu/Ni/Ti Elements and Inhomogeneous Composites

Effects of Interfacial Residual Stress on Mechanical Behavior of SiC F /sic Composites

Interfacial reactions between polymer derived SiC fiber and Ti 3Si(Al)C2

Interfacial Bonding of Al-Si/C Composites and Improvement of the Thermal Shock Resistance

Microstructure and Mechanical Properties of Cf/SiC Composites with Dispersed C-SiC Interphase Prepared by Chemical Vapor Infiltration

Mechanisms of Interfacial Reaction and Matrix Phase Transition in SiCf/Ti65 Composites

Effect of Thermal Exposure on the Interface Microstructure and Interfacial Shear Strength of the SiC Fiber Reinforced AlFe5Si2 Matrix Composite

Interfacial Reactions Between Polymer Derived SiC Fiber and Ti<sub>3</sub>Si(Al)C<sub>2</sub>

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior

Interfacial Mechanical Properties of the Domestic 3rd Generation 2.5D SiCf/SiC Composite

Tensile Behavior of SiC Fiber-Reinforced Γ -Tial Composites Prepared by Suction Casting

Effects of Interphase Thickness on Damping Behavior of 2D C/SiC Composites

Interfacial reaction between the oxidized SiC particles and Al-Mg alloys

Effects of interphases on thermal expansion of 3D-C/SIC composites

CNTs/Al Interfacial Reaction Degree and the Relationship with Mechanical Performance of Composite