Abstract:The interfacial reaction plays a decisive role in the mechanical performances of the aluminum matrix composites reinforced with nano carbonaceous materials such as carbon nanotubes (CNTs). Due to the low Gibbs energy of Al4C3 formation and the required high-temperature processes for fabricating densified Al/CNTs composites, it is difficult to regulate the extent of the chemical reaction between Al matrix and CNTs, the dispersed CNTs are easily consumed to be Al4C3 rods. In this work, the Cu nano decoration on the surface of CNTs was proposed to restrict the massive formation of Al4C3. Raman results and systematical observations of transmission electron microscopy (TEM) revealed that the quantity and size of Al4C3 highly relate to the annealing time, and the pre-coating of Cu on the surface of CNTs can effectively limit the Al4C3 formation during the annealing process. Moreover, for the composite reinforced with Cu-coated CNTs, the microhardness, Young's modulus, and tensile properties can be optimized by controlling the annealing time. When the composite reinforced with Cu-coated CNTs was annealed at 550 °C for 12 h, the highest ultimate tensile strength (418 ± 6.5 MPa) together with good ductility (10.7 ± 0.3%) can be achieved, which can be mostly attributed to the limit formation of Al4C3. This work provides an effective approach to regulate the interfacial reaction in Al/CNTs composite and achieve higher mechanical performance accordingly.

CNTs/Al Interfacial Reaction Degree and the Relationship with Mechanical Performance of Composite

Effect of Interfacial Reaction on Young's Modulus in CNT/Al Nanocomposite: A Quantitative Analysis

Effect of Hot Extrusion and Heat Treatment on CNTs–Al Interfacial Bond Strength in Hybrid Aluminium Composites

Enhanced Interfacial Bonding and Mechanical Properties in CNT/Al Composites Fabricated by Flake Powder Metallurgy

Interfacial Modification Using Matrix Alloying in Mg/CNT Composites for Improved Mechanical Performance

Effect of Carbon Nanotube (CNT) Content on the Properties of In-Situ Synthesis CNT Reinforced Al Composites

Effect of Carbon Nanotubes and High Temperature Extrusion on the Microstructure Evolution of Al-Cu Alloy

Regulating the interfacial reaction between carbon nanotubes and aluminum via copper nano decoration

Understanding the Influencing Mechanism of CNTs on the Microstructures and Wear Characterization of Semi-Solid Stir Casting Al-Cu-Mg-Si Alloys

High mechanical strengthened CNTs/Al composite concepts with robust interface and intragranular reinforcement achieved via interfacial thermite reaction

Microstructure Evolution and Wear Characterization of Cnts/Al-Cu-Mg-Si Nanocomposites Manufactured Using Semi-Solid Stir Casting

Effects of milling time and sintering temperature on the mechanical properties of 8 wt% WC/AlCoCrFeNiTi 0.5 high entropy alloy matrix composite

Interfacial Modification and Performance Enhancement of Carbon Matrix/aluminum Composites

Effects of the addition of CNTs and Al alloying on the microstructure and properties of Cu-(Al)/CNTs composites

Enhancement of thermal–mechanical performances via a selective CNTs configuration in laminated CNTs/AZ31B composite

Enhanced load transfer by designing mechanical interfacial bonding in carbon nanotube reinforced aluminum composites

A Quantitative Method to Characterize the Al 4 C 3 -Formed Interfacial Reaction: the Case Study of MWCNT/Al Composites

Investigation into the Influence of Carbon Nanotubes Addition on Residual Stresses and Mechanical Properties in the CNTs@SiCp/Mg-6Zn Hybrid Composite Using Neutron Diffraction Method

Effect of Interfacial Structure on the Thermal Conductivity of Carbon Nanofibers Reinforced Aluminum Nitride Composites

Mechanical Properties and Interfacial Analysis of Aluminum Matrix Composites Reinforced by Carbon Nanotubes with Diverse Structures

Temperature Effects on Solid State Bonding Joints of Ultrafine-Grained CNT/Al-Cu-Mg Composites