Abstract:An efficient global sensitivity analysis method based on the Polynomial Chaos (PC) method is applied to investigate the strength of a trimaran cross-deck structure. The PC method can reduce the amount of computation and converge faster than the Monte Carlo (MC) method. For the quantitative investigation of the sensitivity of the stresses in the cross-deck to the changes in the cross-deck plate thickness, Latin Hypercube Sampling (LHS) was used to obtain samples, and a Finite Element Method (FEM) model was used to compute the stress based on a load case prescribed by the Rules for the Classification of Trimarans. The PC surrogate models of different degrees of polynomial were trained and validated from the perspective of bias and variance. The third-degree PC model was selected to approximate the response of the stresses to the plate thickness. The global sensitivity indices were computed on the basis of the PC surrogate model, and the results were compared with those obtained by MC. The third-degree PC surrogate model effectively approximates the response of the stresses to the plate thickness, and the sensitivity indices of PC converges much faster than those of MC with respect to the number of samples. The stress at the corner of the cross-deck is the most sensitive to the thickness of the aft web. Meanwhile, the stress at the main-hull connection is the most sensitive to the thickness of the lower panel. Furthermore, the maximum von Mises stress and shear stress at the side-hull connection are the most sensitive to the thickness of the upper panel, and the maximum principal stress at the side-hull connection is the most sensitive to the thickness of the lower panel. The feasibility and efficiency of the PC method is proven, and the influence of the plate thickness on the stress response is described quantitatively.

Simplified Calculation of Catamaran Cross-Deck Structural Strength

Investigation of the Fatigue Stress of Orthotropic Steel Decks Based on an Arch Bridge with the Application of the Arlequin Method

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Evaluation of Simplified Superposition Design Method for Composite Columns

Simplified calculation for the stiffness of R.C. simple-supported cracked beams under uniform loads

Finite Element Analysis on the Transverse and Torsion Strength of a Wave Piercing Catamaran

Ultimate Longitudinal Strength of Composite Ship Hulls

Mechanical properties analysis of the naval ship similar model with an integrated sandwich composite superstructure

A simplified modeling and analysis approach for nonlinear transient dynamic evaluation of ship hull with single plate equivalence

Experimental and numerical investigation on the ultimate strength of a ship hull girder model with deck openings

Mechanical analysis and interior stiffeners arrangement discussion of a specific ship side collision situation

Method for determining the form factor 1+k of multihull vessel

A new analytical model to evaluate ship side collisions with large indentation considering interaction effects between structural components

FEM Structural Analysis for Ship's Beam Modification: A Case Study

Ultimate strength assessment of hull girders considering elastic shakedown based on Smith's method

Advanced empirical formulae for the ultimate strength assessment of continuous hull plate under combined biaxial compression and lateral pressure

Analysis of the overall structural strength and optimization recommendations for ultra-large container ships based on the improved equivalent design wave method

Discussion of Grid Generation for Catamaran Resistance Calculation

Simplified Method for the Stiffness Computation of T-shaped Integrated Composite Structure

Study on the assessment of axial crushing force of bulbous bow for bridge against ship collision

Application of the polynomial chaos method in global sensitivity analysis of trimaran cross-deck structure