Abstract:The crane installation on the deck of a yacht redistributes the stress field and affects the local structural integrity and performance. The safe operation of the yacht is associated with the optimal placement of the crane on the deck and the proper local structural reinforcement. Here, the structural analysis of the bow part of a yacht made of composite materials is studied, considering the retrofit installation of a crane, in three different cases of reinforcing the deck: (a) without any reinforcement, (b) with a T-type reinforcement, and finally, (c) with a longitudinal beam. The T-type connects the longitudinal bulkhead and the deck, reinforced locally with overlamination skin and adhesive-filler. The longitudinal beam works as a local longitudinal stiffener attached to the deck and connects the second, third, and fourth transverse frames. The structural analysis is performed using the finite element method following the classification societies' rules. The local reinforcements are made from the same composite materials as the unreinforced deck. The maximum deformations, the principal stresses, and the safety factors following Tsai-Wu and Hashin criteria are calculated and compared for the three different cases. The T-type and longitudinal reinforcements reduce deck stresses by 33%, with longitudinal reinforcement reducing deck deformation by 17%. Composite failure analysis shows the structure was near failure, and the reinforcements enhance safety; T-type is better for multiaxial loads (Tsai-Wu), and longitudinal is superior for micromechanical failure (Hashin). By considering the structural performance and safety aspects, designers and engineers can make optimal decisions regarding yacht crane installation and proper reinforcement, leading to safer and more efficient structures.

FEM Structural Analysis for Ship's Beam Modification: A Case Study

Numerical simulation analysis of dynamical performance of equipment protecting from ship-bridge collision

Optimization Analysis for the Typical Details of Ship Structures

Analysis of plated-hull structure strength against hydrostatic and hydrodynamic loads: A case study of 600 TEU container ships

Several Critical Technologies of the Whole-Ship Structural Analysis Through FEM

Mechanical analysis and interior stiffeners arrangement discussion of a specific ship side collision situation

Analysis and Photoelastic Test on the Stress Concentration of Superstructure End and Broadside with Large Opening

Finite Element Modeling Method for Composite Ship Hull

Experimental and numerical investigation on the ultimate strength of a ship hull girder model with deck openings

Advanced Analysis of Marine Structures—Edition II

Modal analysis of ship stern by numerical and experimental method

Experimental numerical and analytical analysis of the penetration of a scaled double-hull tanker side structure

Analysis of Collision Damaged Ship's Residual Strength Based on Fast Assessment of Structural Properties

STATIC AND DYNAMIC MECHANICS ANALYSIS FOR A LARGE-SCALE RIGIDITY-FLEXIBILITY AIRSHIP STRUCTURE

NONLINEAR FINITE ELEMENT ANALYSIS OF MECHANICALLY ANCHORED REINFORCED STEEL I BEAMS

Structure design and strength evaluation of container ship cargo area

Numerical Investigation of Three-Dimensional Hull Girder Ultimate Strength Envelope for an Ultra Large Container Ship

FEM Analysis on Cyclic Behavior of Improved Beam-Column Connections in Steel Frames

Static analysis of hat stiffeners on the composite ship

Structural Evaluation on the Floating Production Storage and Offloading Large Flow Gas Processing Module Based on FEM Analysis

Structural Analysis of Deck Reinforcement on Composite Yacht for Crane Installation