Abstract:Facing the apparent enhancement of rated power of offshore wind turbines, the increasing rotor diameter and blade length gradually pose severe challenges to its support structure for resisting extreme loads. Due to the remarkable composite effect, the recently developed tapered concrete-filled double skin steel tubular (CFDST) members can provide a high-performance structural type and competitive application prospect compared to traditional steel tower barrels. Therefore, this paper conducted the numerical and theoretical research on out-of-code tapered CFDST members under pure torsion and compression-torsion combination. The finite element (FE) model was established to examine the full-range mechanism including torque versus deformation response ( T - θ curve), interaction behavior and component contribution, indicating that four characteristic points can distinguish the T - θ curve under pure torsion, and slight contact pressure between the inner tube and sandwich concrete exists along the height direction. The parametric study was performed to investigate the influences of geometric-physical parameters, e.g., by increasing tapered angle ( ψ ) 0.2°, the torsional capacity obtains a reduction of 5%; hollow ratios ( χ ), axial compression ratios, and diameter-to-thickness ( D / t ) ratios of double-skin tubes obviously affect the torsion resistance; altering steel yield grade influences torsional capacity than concrete grade. Subsequently, a theoretical multilayered cylinder model as the simplified design tool was proposed to simulate full-range T - θ curves of tapered CFDST members. Moreover, a modified design method for calculating N - T correlation curve was developed and validated by introducing the refined equations of pure torsion resistance ( T u ), where the design methods in current codes displayed a quite conservative prediction for tapered CFDST members with out-of-code parameters (e.g., hollow ratios or D / t ratios). The above research on out-of-code tapered CFDST members can offer valuable design guidelines for its engineering applications.

Finite Element Analysis on the Transverse and Torsion Strength of a Wave Piercing Catamaran

Study on Ultra‐low Cycle Fatigue Fracture of Thick‐walled Steel Bridge Piers

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

Numerical Analysis and Punching Shear Fracture Based Design of Longitudinal Plate to Concrete-Filled CHS Connections

Simplified Calculation of Catamaran Cross-Deck Structural Strength

Numerical investigation on the ultimate strength behaviour and assessment of continuous hull plate under combined biaxial cyclic loads and lateral pressure

Application of CFD and FEA Coupling to Predict Structural Dynamic Responses of A Trimaran in Uni- and Bi-Directional Waves

Structural Strength Study of A Floating Wind Turbine Under Freak Waves Through the CFD-FEA Method

Theoretical and experimental investigation of circumferential guided waves in orthotropic annuli

Overall Strength Analysis of Floating Offshore Wind Turbine Foundation

Numerical studies of hydroelastic performances of a pontoon-truss composite floating bridge under regular waves

Load effects on vessel-shaped fish cage steel structures, nets and connectors considering the effects of diffraction and radiation waves under irregular waves

A wave model of high frequency vibrational energy transfer in a wedge-shaped combined plate structure

Structural Ultimate Strength Analysis of Anti-Collision Facility of Yinzhou lake Bridge Under Vessel-Generated waves

Experimental study of dynamic pressure and wave load on variform vertical cylinders under extreme waves

Analytical behavior and bearing capacity research on out-of-code tapered CFDST members under pure torsion and compression-torsion combination

Study on the influence of localised thermal load on collapse strength of stiffened panels under longitudinal compression

Numerical investigation and optimum design of complex thin-walled structures subject to internal pressure load

Ultimate Longitudinal Strength of Composite Ship Hulls

Experimental and Numerical Studies on the Ultimate Bending Strength of Welded Plated Grillage with Combined Openings

Simplified Strength Assessment for Preliminary Structural Design of Floating Offshore Wind Turbine Semi-Submersible Platform