Abstract:Rotor may physically contacts with stationary elements of a rotating machine, and the subsequent rubbing at the contact area is a serious malfunction in rotating machinery that may lead to the machine's catastrophic failure. Usually, it is deemed as a secondary phenomenon resulting from a primary cause which perturbs the machine during normal operating conditions. Generally, there are two types of rubs, i.e., radial rub and axial rub. In this paper, the dynamic response of a rotor system with two types of rubs and unbalances is investigated numerically. Then, characteristics of dynamic behavior for both types of rubs could be achieved. It indicates that symptoms of axial rub are similar with that of unbalance, where 1X vibration is the main component in FFT results. While, radial rub will result 0.5X and 1X vibration in FFT result. Combing a troubleshooting process of a steam turbine in an ammonia plant and field test data, the numerical results are confirmed furthermore although there are some differences in vibration characteristics between numerical results and field test results. Under axial rub impact, the fault force emerges even at low speed. Its spectrum characteristics are more like those of radial rub impact at low speed and more like those of unbalance at high speed. On these bases, methods of preventing rub-impact faults as the machine operating are presented and investigated theoretically focusing on how to exert external forces to counteract those forces resulting from rubbing. Experimental investigations are conducted and their results indicate that the method presented in this paper is useful and feasible.

Diagnosis and Treatment of Turbo-generator Unit Abrupt Vibration Fault in a Power Plant

Research on the Fault Diagnosis Method for Slip Ring Device in Doubly-Fed Induction Generators Based on Vibration

Time-frequency Analysis on Torsional Vibration of Turbo-generator Shafts

Analysis of Flexural and Torsional Vibration for Turbogenerator Shafts on Power Impact

Analysis and Treatment of Unstable Vibration Problem in Turboset

The Vibration and Dynamic Balancing at Site of Homemade 60Hz Steam Turbine Set

Fault diagnosis analysis of aeroengine test vibration

Mechanical fault diagnosis for abnormal vibration excited by steam in high pressure turbine of turbo-generator set

Research on Fault Mechanism of Rotor to Stator Rub Nonlinear Vibration in High-Speed Turbo Machinery

Vibration Analysis and Diagnosis on the Centrifugal Pump Gear Box

Research on Vibration Fault Diagnosis Strategy for Commonly Supported Rotor of Turbogenerator

Fault Diagnosis of Wind Turbine Gearbox Based on Vibration Data

Treatment on Axial Vibration of Heavy-duty Blast Furnace Blower

Analysis of Vibration Due to Turbine Generator Coupling Bolts Failure

Analysis and treatment of common vibration troubles of turbine compressor

Theoretical and Experimental Study on the Fault Self-recovering system of High Speed Turbo Machinery

An Abnormal Vibration Analysis & Diagnosis of Some PTA Device

STUDY ON METHODS OF VIBRATION FAULT DIAGNOSIS BASED ON TIME-FREQUENCE CONTOUR MAP FOR TURBINE GENERATOR UNIT

Vibration Analysis for Fault Detection of Wind Turbine Drivetrains-A Comprehensive Investigation

Fault mechanisms and diagnosis methods for typical load mutation problems of turbo-generator sets

Numerical And Experimental Investigation On The Controlling For Rotor-To-Stationary Part Rubbing In Rotating Machinery