Abstract:Amorphous alumina films are isotropic and have no grain boundaries, which make them have smooth surfaces, excellent properties, and wide applications in protective coatings, catalysis, and microelectronics. However, high-quality alumina films were usually prepared by vapor-phase approaches which need expensive equipment and long production time. Additionally, amorphous films are long-range disordered, which makes the study of structure–property relationships challenging. Here, a simple sol–gel method is employed to obtain high-quality amorphous Al2O3 thin films. The microstructure, morphology, and mechanical properties of amorphous Al2O3 thin films were systematically investigated. All the Al2O3 thin films heat-treated at 600–800∘C are in amorphous state with ultrasmooth surface (Ra values about 0.29–0.43 nm) and high mechanical properties (elastic modulus ∼170[Formula: see text]GPa, hardness ∼20[Formula: see text]GPa). The mechanical properties (E and H) of Al2O3 films gradually increase with the increase of heat-treating temperature. Additionally, the Al coordination of the amorphous alumina films are analyzed by solid-state NMR and correlated with the mechanical properties. The results show that in amorphous alumina, the presence of tetrahedral Al ([4]Al) and octahedral Al ([6]Al) is helpful to improve the mechanical properties, while the five-coordinated Al ([5]Al) is not conducive to improve the mechanical properties. The results demonstrate that sol–gel method is an attractive alternative to time-consuming and expensive vapor-phase approaches and are useful for scale-up to applications and research of amorphous alumina films.

Vapor-phase Synthesis and Mechanical Properties of Al2O3 Nanosheets

Anisotropic mechanical properties of α-MoO3 nanosheets

The Microstructure, Morphology, and Mechanical Properties of Sol-Gel-derived Amorphous Aluminum Oxide Films

In situ study on bending modulus of Al2O3nanotubes prepared by atomic layer deposition

Synthesis, Densification and Characterization of Nanosized Oxide Ceramic Powders with Eutectic Compositions by Heating of Alcohol-Aqueous Salt Solutions

Preparation and Tensile Properties of Al2O3/Ni-Co Nanocomposites

A Novel Two-Step Processing Method for Fabrication of in Situ Al2O3np/Al-Al11Ce3 Nanocomposite

Mechanical Characterization of Hotplate Synthesized Vanadium Oxide Nanobelts

Microstructure and mechanical properties of SiC-Al2O3 nanocomposite prepared by surface modified SiC nanopowders

Temperature-Controlled Growth of Alpha-Al2o3 Nanobelts and Nanosheets

V2O5·nH2O Crystalline Nanosheets: Hydrothermal Fabrication and Structure Evolution

Study on Microstructure and Mechanical Properties Of（alcrtizrnb）n/al2o3 Nano-multilayer Film

Molecular Dynamics Simulations of Al2O3/Epoxy Nano-composite with Improved Heat-Resistance and Elastic Modulus

Vapor growth and photoconductive property of single-crystalline MoO 3 nanosheets

Mechanical Properties and Deformation Mechanism of Al2O3determined Fromin Situtransmission Electron Microscopy Compression

Mechanical properties and strengthening mechanism of the hydrothermal synthesis of nano-sized α-Al2O3 ceramic particle reinforced molybdenum alloy

Synthesis, microstructure and properties of MoAlB MAB phase films

Characterization of Al2O3 in High-Strength Mo Alloy Sheets by High-Resolution Transmission Electron Microscopy.

Grain Size Dependence, Mechanical Properties and Surface Nanoeutectic Modification of Al2O3-ZrO2 Ceramic

One-time mass production of AlN nanosheets: Synergistic effect of high-energy shear and effective collision in a sanding mill

Study of Mechanical Property, Oxidation Property and Mechanism of Si3N4/O′-SiAlON Composites Fabricated by Adding Different Sizes of SiO2