Abstract:A joint chemical reactor system referred to as an ultrasonic-intensified micro-impinging jetting reactor (UIJR), which possesses the feature of fast micro-mixing, was proposed and has been employed for rapid preparation of FePO4 particles that are amalgamated by nanoscale primary crystals. As one of the important precursors for the fabrication of lithium iron phosphate cathode, the properties of FePO4 nano particles significantly affect the performance of the lithium iron phosphate cathode. Thus, the effects of joint use of impinging stream and ultrasonic irradiation on the formation of mesoporous structure of FePO4 nano precursor particles and the electrochemical properties of amalgamated LiFePO4/C have been investigated. Additionally, the effects of the reactant concentration (C=0.5, 1.0 and 1.5molL−1), and volumetric flow rate (V=17.15, 51.44, and 85.74mLmin−1) on synthesis of FePO4·2H2O nucleus have been studied when the impinging jetting reactor (IJR) and UIJR are to operate in nonsubmerged mode. It was affirmed from the experiments that the FePO4 nano precursor particles prepared using UIJR have well-formed mesoporous structures with the primary crystal size of 44.6nm, an average pore size of 15.2nm, and a specific surface area of 134.54m2g−1 when the reactant concentration and volumetric flow rate are 1.0molL−1 and 85.74mLmin−1 respectively. The amalgamated LiFePO4/C composites can deliver good electrochemical performance with discharge capacities of 156.7mAhg−1 at 0.1C, and exhibit 138.0mAhg−1 after 100 cycles at 0.5C, which is 95.3% of the initial discharge capacity.

Pure LiFePO4 with High Energy Density Prepared by Water Quenching Treatment

Technical Optimization of LiFePO 4 Preparation by Water Quenching Treatment

LiFePO4 cathode power with high energy density synthesized by water quenching treatment

Rapid Preparation of High Electrochemical Performance LiFePO4/C Composite Cathode Material with an Ultrasonic-Intensified Micro-Impinging Jetting Reactor

Olivine LiFePO4 Nanocrystallites Embedded in Carbon-Coating Matrix for High Power Li-ion Batteries

Effect of Cooling Modes on Microstructure and Electrochemical Performance of LiFePO4

Synthesis and Characterization of LiFePO4 Nanoparticle/Mesoporous Carbon Composites As High-Power Cathode Materials for Lithium-Ion Batteries

Ultrafast Fabrication of LiFePO 4 with High Capacity and Superior Rate Cycling Performance for Lithium Ion Batteries

Preparation and Characteristic of High-Density Spherical LiFePO4

Morphology and Reaction Mechanism of LiFePO4 Prepared by Hydrothermal Synthesis

High Density LiFePO4/C Synthesized by Controlled Crystallization and Microwave Carbon Thermal Reduction

Study on the Preparation of Lifepo4 by Hydrothermal Method

Preparation and Electrochemical Performance of Spherical LiFePO4

Preparation and Performance of FePO_4 Precursor for LiFePO_4

Electrochemical Properties of LiFePO4/C Cathode Materials Prepared under Vacuum Conditions

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery

LiFePO<sub>4</sub>/C Cathode Materials Prepared by One-Step Fast Carbothermal Method Using Fe<sub>2</sub>O<sub>3</sub> as Raw Materials

Nano particle LiFePO4 prepared by solvothermal process

Water based processing of LiFePO4/C cathode material for Li-ion batteries utilizing freeze granulation

LiFePO4 prepared by carbothermal reduction method

Preparation of lithium iron phosphate with superior electrochemical performances from titanium white by-product ferrous sulfate