Abstract:The development of Zn-air batteries with a high energy density of 1350 W h kg-1 is one of the breakthroughs required to achieve a low carbon society. However, morphology control of the Zn negative electrode during charge/discharge (Zn-deposition/stripping) is essential for practical application. Considering the manufacturing process, a simple strategy is preferable. Herein, we employed surfactants as an inhibitor of the formation of mossy and dendrite Zn structures, and studied electrochemical Zn growth from the perspective of the electric charge of the surfactant. Even by using an additive free electrolyte of 0.25 M ZnO + 4 M KOH and with 1 mM sodium dodecyl sulfate (SDS: anionic surfactant) or polyacrylic acid (PAA: non-ionic surfactant), mossy and dendrite formations were unavoidable irrespective of the current density. On the other hand, a cationic surfactant, trimethyloctadecylammonium chloride (STAC), suppressed the shape change and resulted in a smooth and dense morphology. Zeta potential measurements, kinetic current densities observed from Tafel plots, and constant potential electrolysis indicate that quaternary ammonium cations (STAC) with bulky size adsorb onto protrusions which are the cause of shape change and suppress Zn deposition in the region to promote lateral growth. Although the adsorption of STAC increased the average overvoltage for Zn-deposition/stripping in a symmetric Zn|Zn cell under a current density of 10 mA cm-2, significantly stable behavior continued for 200 h. In contrast, the overvoltage of the additive free system suddenly increased after 156 h, associated with the accumulation of insulating ZnO and Zn(OH)2 formed on the Zn surface. In charge-discharge tests using an asymmetric Cu|Zn cell, the coulombic efficiency in the additive free electrolyte was less than 95%, whereas the addition of STAC at 1 mM achieved superior cycling performance without any capacity loss originating from the generation of dead Zn (electrical isolation). These results demonstrate that the addition of STAC is a promising method of controlling the Zn morphology.

Effects of Stannous Ions on the Electrochemical Performance of the Alkaline Zinc Electrode

The Effect of Suspended Particles on the Corrosion Resistance of Electrodeposited Zinc Powders

Electrochemical Study of the Additive-Effect on Sn Electrodeposition in a Methansulfonate Acid Electrolyte

Effect of Tin Ion Additive on Zinc Electrode in Alkaline Solution

Effects of Solid-Solute Magnesium and Stannate Ion on the Electrochemical Characteristics of a High-Performance Aluminum Anode/electrolyte System

Regulating Zn-ion Solvation Structure and Zn(002) Deposition for Stable Zn Anode

The Effects of Surface Treatment and Stannate As an Electrolyte Additive on the Corrosion and Electrochemical Performances of Pure Aluminum in an Alkaline Methanol–water Solution

Preparation of Cubic Zinc Stannate Nanopowder and Its Application in Silver-Based Electrical Contact Material

Tendency Regulation of Competing Reactions Toward Highly Reversible Tin Anode for Aqueous Alkaline Batteries

Effect of Na2SiO3 and SDBS electrolyte additives on corrosion inhibition of zinc electrodes and electrochemical performance of zinc–air batteries

Effects of Stannum on Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloy

Effect of the Sn Addition on the Electrochemical Properties of Al/Pb Anodes and Its Application in Zinc Electrowinning

Effect of Na2SiO3 and TEA Electrolyte Additives on the Corrosion Inhibition of Zinc Electrodes and Electrochemical Performance of Rechargeable Alkaline Manganese Batteries

Stabilizing Zinc Anodes by a Uniform Nucleation Process with Cysteine Additive

Influence of surface modification with Sn6O4(OH)4 on electrochemical performance of ZnO in Zn/Ni secondary cells

Effect of Sn Content on the Properties of Passive Film on PbSn Alloy in Sulfuric Acid Solution

Effect of Nanocomposite Additives on Corrosion Inhibition of Zn Anode in Neutral Solution

Effects of F - ions on the electrochemical and interface behavior of cathodes in zinc electrowinning

Morphology control of zinc electrodeposition by surfactant addition for alkaline-based rechargeable batteries

Corrosion and Anodic Behaviors of Pure Aluminum in a Novel Alkaline Electrolyte

Stannate-Based Materials as Anodes in Lithium-Ion and Sodium-Ion Batteries: A Review