Abstract:The influence of glycine, as a chelating agent, and triblock copolymer mixture of PPG-PEG-PPG and PEG1000, as a suppressor agent, on the deposition mechanisms of zinc and zinc-nickel alloys were studied by cyclic voltammetry (CV) and potentiometric electrochemical impedance spectroscopy (PEIS), using electrolyte solutions of chlorinated acid. Cyclic voltammetry measurements show that the composition of the electrolytic solution affects the voltammogram profiles. Complementary PEIS investigations allowed the electrodeposition mechanisms to be highlighted depending on the composition of the electrolytic solution. The electrodeposition of zinc, in the absence of additives, occurs in a single cathodic wave from the ZnCl 3 − species, whereas in the presence of glycine, a second more cathodic reduction wave is relative to the Zn(Gly) 2 2+ species. The presence of the PPG-PEG-PPG and PEG1000 triblock copolymer induces a clear inhibition of the zinc reduction. Nevertheless, the zinc electrodeposition follows a three-dimensional instantaneous nucleation. The zinc electroplating mechanism involves a capacitive semi-circle at high frequency and two inductive loops at medium and low frequencies assigned to two adsorbed intermediates onto the substrate whatever the electrolyte composition. The presence of the polymer mixture affects the zinc reduction by increasing the charge-transfer resistance and the adsorption phenomena on the substrate. The electrodeposition of zinc-nickel alloys reveals a single reduction wave, from ZnCl 3 − and Ni(Gly) 2+ species, and multiple anodic signals depending on the electrolytic composition, according to the presence of glycine to chelate the nickel species. The zinc-nickel electroplating was evidenced to be a multiple-step process with a three-dimensional instantaneous nucleation, including intermediate species adsorbed onto the substrate. The equivalent circuit proposed consists of two capacitive half-circles separated by an inductive loop for any electrolytic solution. However, the impedance spectra were affected by the presence of glycine by modifying the inductive loop reflecting the first adsorbed intermediate (Ni(I) ads ). The morphology of zinc and zinc-nickel, with a nickel content between 14 and 19 wt.%, is affected by the electrolyte composition, however with the same crystal lattice. The preferential orientation of the lattice was shown to depend on the additives present in the solution.

Effect of Nanocomposite Additives on Corrosion Inhibition of Zn Anode in Neutral Solution

Synergistic effect of surfactant and 1,10-decanedithiol as corrosion inhibitor for zinc anode in alkaline electrolyte of zinc-air batteries

Effect of Na2SiO3 and TEA Electrolyte Additives on the Corrosion Inhibition of Zinc Electrodes and Electrochemical Performance of Rechargeable Alkaline Manganese Batteries

Carbon nanohorns/nanotubes: An effective binary conductive additive in the cathode of high energy-density zinc-ion rechargeable batteries

An electrolyte additive for interface regulations of both anode and cathode for aqueous zinc-vanadium oxide batteries

Effect of Na2SiO3 and SDBS electrolyte additives on corrosion inhibition of zinc electrodes and electrochemical performance of zinc–air batteries

The effects of additive agents on zinc and zinc-nickel alloys electrodeposited on steel substrates in acidic electrolytes

A low fraction electrolyte additive as interface stabilizer for Zn electrode in aqueous batteries

Guiding Zn Uniform Deposition with Polymer Additives for Long‐lasting and Highly Utilized Zn Metal Anodes

Effect of sodium‐zinc EDTA and sodium gluconate as electrolyte additives on corrosion and discharge behavior of Mg as anode for air battery

An amphoteric betaine electrolyte additive enabling a stable Zn metal anode for aqueous batteries

Highly Reversible Zinc Metal Anode in a Dilute Aqueous Electrolyte Enabled by a pH Buffer Additive

Tetra-alkyl Ammonium Hydroxides As Inhibitors of Zn Dendrite in Zn-based Secondary Batteries

Stabilizing a Zn Anode by an Ionic Amphiphilic Copolymer Electrolyte Additive for Long-Life Aqueous Zn-Ion Batteries

Mitigating Zn Dendrite Growth and Enhancing the Utilization of Zn Electrode in Aqueous Zn-Ion Batteries

Nicotinic Acid Additive with the Double Regulating Mechanism for High-Performance Aqueous Zinc Ion Batteries

Stable zinc anode achieved through ultramicro long chain cationic surfactant as interface regulator in aqueous electrolyte

Elucidating synergistic mechanisms of an anion–cation electrolyte additive for ultra-stable zinc metal anodes

Sabatier Effect Based Adsorption-Desorption Coordination Via Cationized Chitosan for Enhancing Ion Kinetics in Zinc Anodes

Enabling Stable Zn Anode with PVDF/CNTs Nanocomposites Protective Layer Toward High‐Performance Aqueous Zinc‐Ion Batteries

Screening Ammonium‐Based Cationic Additives to Regulate Interfacial Chemistry for Aqueous Ultra‐Stable Zn Metal Anode