Abstract:To study the flexural behavior of prestressed concrete beams with high-strength steel reinforcement and high-strength concrete and improve the crack width calculation method for flexural components with such reinforcement and concrete, 12 specimens were tested under static loading. The failure modes, flexural strength, ductility, and crack width of the specimens were analyzed. The results show that the failure mode of the test beams was similar to that of the beams with normal reinforced concrete. A brittle failure did not occur in the specimens. To further understand the working mechanism, the results of other experimental studies were collected and discussed. The results show that the normalized reinforcement ratio has a greater effect on the ductility than the concrete strength. The cracking- and peak-moment formulas in the code for the design of concrete (GB 50010-2010) applied to the beams were both found to be acceptable. However, the calculation results of the maximum crack width following GB 50010-2010 and EN 1992-1-1:2004 were considerably conservative. In the context of GB 50010-2010, a revised formula for the crack width is proposed with modifications to two major factors: the average crack spacing and an amplification coefficient of the maximum crack width to the average spacing. The mean value of the ratio of the maximum crack width among the 12 test results and the relative calculation results from the revised formula is 1.017, which is better than the calculation result from GB 50010-2010. Therefore, the new formula calculates the crack width more accurately in high-strength concrete and high-strength steel reinforcement members. Finally, finite element models were established using ADINA software and validated based on the test results. This study provides an important reference for the development of high-strength concrete and high-strength steel reinforcement structures.

Experimental investigation on shear bearing capacity of prestressed steel reinforced ultra-high-strength concrete beams

Experimental Studies on Shear Strength of Steel–Concrete Composite Beams

RESEARCH ON FLEXURAL PERFORMANCE OF DOUBLE-STEEL REINFORCED CONCRETE BEAM

PLASTIC ANALYSIS OF SHEAR BEHAVIOR OF COMPOSITE STEEL-CONCRETE BEAMS

Experimental Study on Shear Performance of Post-Tensioning Prestressed Concrete Beams with Locally Corroded Steel Strands

Shear behavior of prestressed concrete T-beams strengthened by steel plate-concrete composite

Ductility and Ultimate Capacity of Prestressed Steel Reinforced Concrete Beams

EXPERIMENTAL RESEARCH ON SHEAR BEHAVIOR OF COMPOSITE REINFORCEMENTCONCRETE PREFABRICATED SQUARE PILES

Experimental Research and Analysis on Shearing Behavior of Reinforced Self-compacting Concrete Beams

Experimental study on shear behavior of hollow slab beam strengthened with pasting steel plates

Shear strength of prestressed concrete beams with short shear span: Full‐scale experiments and evaluation of design methods

EXPERIMENTAL RESEARCH ON PRESTRESSED STEEL & CONCRETE COMPOSITE BEAM

Flexural behavior of high-strength, steel-reinforced, and prestressed concrete beams

Experimental study on simply supported steel plate-concrete composite beams

Experimental study on flexural behavior of partially precast high-strength steel reinforced ultra-high performance concrete beam

Experimental and Theoretical Investigations on Crack Spacing and Stiffness of Textile-Reinforced Concrete–strengthened Reinforced Concrete Beams

Experimental study on the shear behavior of precast concrete segmental simply supported beam with internal tendons and glue joints

Investigation on flexural behavior of steel-UHPC composite beams with steel shear keys

Experimental Study of Crack Resistance of Steel-Concrete Composite Beams

Experimental investigation and evaluation of shear performance of hollow slab beams strengthened by cavity grouting method

Study on shear capacity of prestressed composite joints with concrete-encased CFST columns