Abstract:In this study, Co60Fe20Sm20 alloy was employed for sputter deposition onto Si(100) substrate within a high vacuum environment, and subsequent thermal treatment was conducted using a vacuum annealing furnace. Thorough measurements and analyses were carried out to evaluate how various film thicknesses and annealing temperatures affect the material. The investigations encompassed observations of structural and physical properties, magnetic traits, mechanical behavior, and material adhesion. The results from the four-point probe measurements clearly demonstrate a trend of decreasing resistivity and sheet resistance with increasing film thickness and higher annealing temperature. Analysis through atomic force microscopy (AFM) shows that heightened annealing temperature corresponds to decreased surface roughness. Furthermore, when analyzing low-frequency alternating current magnetic susceptibility (χac), it became evident that the maximum magnetic susceptibility value consistently rises with increased film thickness, regardless of the annealing temperature. Through magnetic force microscopy (MFM) observations of magnetic domain images in the films, it became apparent that there was a noticeable reduction in the brightness contrast of the magnetic domains. Furthermore, nanoindentation analysis reveals a clear trend. Elevating the film thickness leads to a reduction in both hardness and Young's modulus. Contact angles range between 67.7° and 83.3°, consistently under 90°, highlighting the hydrophilic aspect. Analysis of surface energy demonstrates an escalation with increasing film thickness, and notably, annealed films exhibit a substantial surge in surface energy. This signifies a connection between the reduction in contact angle and the observed elevation in surface energy. Raising the annealing temperature causes a decline in surface roughness. To summarize, the surface roughness of CoFeSm films at different annealing temperatures significantly impacts their magnetic, electrical, and adhesive properties. A smoother surface reduces the pinning effect on domain walls, thus enhancing the χac value. Furthermore, diminished surface roughness leads to a decline in the contact angle and a rise in surface energy. Conversely, rougher surfaces exhibit higher carrier conductivity, contributing to a reduction in electrical resistance.

Microstructure and mechanical properties of heat-treated GeSb 2 Te 4 thin films

Microstructure and mechanical properties of heat-treated GeSb<sub>2</sub>Te<sub>4</sub> thin films

Investigation of adhesive and frictional behavior of GeSbTe films with AFM/FFM

Direct Observation of Phase Transition of Gesbte Thin Films by Atomic Force Microscope

Study of Structural and Electrical Properties of Phase-Change Materials Ge1Sb2Te4 and Ge2Sb2Te5 Thin Films

Thermal-Induced Optical Changes In The Amorphous Ge20sb15se65 Film

Mechanical Properties of Phase-change Recording Media: GeSbTe Films

Temperature-dependent phase separation during annealing of Ge 2 Sb 2 Te 5 thin films in vacuum

Phase Transition of Gesbte Thin Films Induced by Thermal Treatment and Laser Irradiation

Optical constants acquisition and phase change properties of Ge2Sb2Te5 thin films based on spectroscopy

Microstructure and optical properties of Ag 5 In 5 Te 47 Sb 33 phase change thin films with high reflection in thermal annealing process

Effects Of Thermal Treatment On The Optical Constants Of Gete, Sb2te3, Ge2sb2te5 Systems

Studying the Effects of Annealing and Surface Roughness on Both the Magnetic Property and Surface Energy of Co60Fe20Sm20 Thin Films on Si(100) Substrate

Microstructure And Optical Properties Of Ag5in5te47sb33 Phase Change Thin Films With High Reflection In Thermal Annealing Process

Influence of annealing on the structural and electrical transport properties of Bi 0.5 Sb 1.5 Te 3.0 thin films deposited by co-sputtering

Mechanical and Environmental Properties of Ge1−xCx Thin Film

Annealing Effect on the Contact Angle, Surface Energy, Electric Property, and Nanomechanical Characteristics of Co40Fe40W20 Thin Films

Effect of Annealing on the Structural, Magnetic and Surface Energy of CoFeBY Films on Si (100) Substrate

Effects of heat treatment on the microstructure and optical properties of sputtered GeO2 thin films

Surface Roughness-Induced Changes in Important Physical Features of CoFeSm Thin Films on Glass Substrates during Annealing

Effect of annealing on the structural and thermoelectric properties of nanostructured Sb2Te3/Au semiconductor/metal multilayer films