Abstract:A simple triple-branch current reference with high power-supply rejection ratio(PSRR) was proposed to enhance the accuracy and stability of current reference of CMOS integrated circuits. Using Kirchhoff's current and voltage law(Kvl,Kcl) and partial differential equations,the small-signal models of conventional and cascade current references were compared with that of the triple-branch current reference,and the PSRRS of these three circuits are solved.The results showed that the PSRR performances of conventional and cascade current references were confined due to the positive feedback loop of node voltage in them,while the triple-branch current reference has a much higher PSRR due to the strong negative feedback loop of node voltage.First order temperature compensation is also adopted in the triple-branch current reference to provide temperature stability.Using CSMC 0.5 μm process,simulation showed that when the input voltage was 1.5~5.0 V,the triple-branch current reference's PSRR reached -77.9 dB,apparently better than those of conventional and cascade current references;and temperature drift within range of-20~120 ℃ was below 255×10-6/℃,which is adequate for most applications.

Temperature Compensated Current Reference Controlled by Feedback

New Technique: A Low Drift Current Reference Based on PMOS Temperature Correction Technology.

A 2.2ppm/°c Compensated Bandgap Voltage Reference with a Double-Ended Current Trimming Technique.

A Novel High PSR Voltage Reference with Secondary Temperature Compensation

A current reference based on bandgap technology with wide input voltage range by using 0.18µm BCD process

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

Novel CMOS Current Reference with High Power-Supply Rejection Ratio

A New Cmos Current Reference with High Order Temperature Compensation

A New 1-V Second-Order Temperature-Compensated Current Reference

A resistorless CMOS current reference with temperature compensation

A High Order Temperature Compensation Current Reference with Extended Operating Temperature Range

Current Reference with Low Temperature Drift and Low Power Supply

Current Reference with Temperature Compensation for Low Power Applications

A digital compensation technique for a current reference in an ultra-wide temperature range

A Novel Curvature-Compensated High Accuracy CMOS Bandgap Reference

A Novel Digital Compensation Technique for Current Bias Without Additional Power Consumption

A 1.8-V 0.7 Ppm/Degrees C High Order Temperature-Compensated Cmos Current Reference

A Bandgap Reference Design with Novel Curvature Compensation

All CMOS Temperature, Supply Voltage and Process Independent Current Reference

A 0.85 V, 4.9 Ppm/°c Inherent Temperature Compensated Voltage Reference with −82 Db PSRR

A 0.6 ppm/°C current-mode bandgap with second-order temperature compensation