Abstract:Temperature has a great influence on the mechanical properties of ductile cast iron or nodular cast iron. A thermomechanical treatment was carried out at various elevated temperatures of 450 °C, 750 °C and 850 °C using a universal testing machine with a tub furnace. Specimens were held at these temperatures for 20 min to ensure a homogeneous temperature distribution along the entire length of the specimen, before a tensile load was applied. Specimens were deformed to various levels of uniform strain (0%, 25%, 50%, 75%, and 100%). These degrees of deformation were measured with a dial gauge attached to a movable cross plate. Three strain rates were used for each specimen and temperature: 1.8×10−4 s−1, 9×10−4 s−1 and 4.5×10−3 s−1. A simple analytical model was extracted based on the CT tensile test geometry and yield stress and a 0.2% offset strain to measure the fracture toughness (JIC). To validate the analytical model, an extended finite element method (XFEM) was implemented for specimens tested at different temperatures, with a strain rate of 1.8×10−4 s−1. The model was then extended to include the tested specimens at other strain rates. The results show that increasing strain rates and temperature, especially at 850 °C, increased the ductility of the cast iron and thus its formability. The largest percentage strains were 1 and 1.5 at a temperature of 750 °C and a strain rate of 1.8×10−4 s−1 and 9×10−4 s−1, respectively, and reached their maximum value of 1.7 and 2.2% at 850 °C and a strain rate of 9×10−4 s−1 and 4.5×10−3 s−1, respectively. In addition, the simple and fast analytical model is useful in selecting materials for determining the fracture toughness (JIC) at various elevated temperatures and different strain rates.

Theoretical Study on Thermal Analysis for Ductile Iron

Study on Thermal Simulation of Solidification in Heavy Section Ductile Iron

Thermal Analysis of Ductile Iron: A New Way to Predict the Mechanical Properties

Integrated System of Thermal/Dimensional Analysis for Quality Control of Metallic Melt and Ductile Iron Casting Solidification

Development of New Ductile Iron with Super-High Thermal Conductivity and Elongation

Thermal Conductivity of Cast Iron - A Review

Numeral Thermal Analysis and Judging Technique of Cast Iron Melt Quality Characterization

Mechanical Properties and Fracture Toughness Prediction of Ductile Cast Iron under Thermomechanical Treatment

Computational simulation of microstructure evolution during solidification of ductile cast iron

Tailoring Carbon Distribution in Α/γ Phase of Ductile Iron and Its Effects on Thermal Conductivity

Evaluation of Melt Quality and Graphite Degeneration Prediction in Heavy Section Ductile Iron

Thermomechanical–microstructural modelling of nodular cast iron solidification

Numerical Simulation of Austempering Heat Treatment of a Ductile Cast Iron

Thermal Stress Analysis of the Solidification Process of Francis Turbine Band Casting

Study on Prediction of Graphite Degeneration Tendency of Heavy Section Ductile Iron Melt

A Study on the Numerical Simulation of Thermal Stress During the Solidification of Shaped Castings

A Study of the Interfacial Heat Transfer Between an Iron Casting and A Metallic Mould

Study of solidification shrinkage of ductile iron in dry sand molds

Fuzzy Neural Network Analysis on Gray Cast Iron with High Tensile Strength and Thermal Conductivity

Isothermal normalizing process for a ductile iron

Investigation on Heat Treatment Process of Austempered Ductile Iron