Abstract:Ultrasonic wedge bonding of aluminum (Al) wires is a widely applied interconnect technology for power elec-tronic packaging. The joint quality of the wedge bonding is mainly affected by the process parameters and material properties. Inappropriate process parameters will lead to failure modes such as chip surface pit, metal layer peeling off, wire cracking, non-sticking to the pad, etc., which limits the long-term stability of power devices. In order to reach the desired reliability, the design of experiment (DoE) is generally deployed which is costly in terms of time and related materials. Therefore, simulation-assisted analysis is in demand to rapidly narrow down the process windows. In this paper, an ultrasonic bonding model involving thick Al wires (300 mu m) was established based on the Finite Element Method (FEM), to optimize process parameters effectively with reduced time and cost. The model was designed in ANSYS utilizing the transient structural mechanics module with various stresses and ultrasonic power, to simulate the relative deformation of the bonded wires and the displacement against the substrate. The result was then verified by ultrasonic wedge bonding samples with 9 sets of process parameters. The stress distributions were simulated and analyzed with the failure modes of tensile strength tests, while the deformation of wires under various process parameters was measured and compared with shear strength tests. Further, the relationship between the failure modes of the joint and the deformation was then analyzed by Response Surface Method (RSM), and the regression equation of the wire deformation and related process parameters was established and fitted with the actual sample's data. Such analysis not only found the optimum range of the deformation of thick Al ultrasonic wire bonds but also quickly provided a range of optimized processes for Al thick wires applying ultrasonic wedge bonding techniques.

In situ measurement of bond resistance varying with process parameters during ultrasonic wedge bonding

Study on Optimized Processing Parameters and Joint Resistance of Device during Ultrasonic Bonding

Evolution of the Bond Interface During Ultrasonic Al–Si Wire Wedge Bonding Process

Simulation and Experimental Analysis of Thermomechanical Stress Around Interconnects for W2W Hybrid Bonding

Interfacial characterization and bonding mechanism of ultrasonic wedge bonding

Bonding Properties Evaluation for an EBW Joint of RAFM Steel by Using Notched Small Tensile Specimens

Irregular Characteristics of Bond Interface Formation in Ultrasonic Wire Wedge Bonding

Electrical Properties Measurement for Interface Research in Silicon Bonding

Mechanism Analysis of Process Parameters Effects on Bondability in Ultrasonic Ball Bonding

Development of non-destructive bond monitoring techniques for ultrasonic bonders

Finite element modeling and analysis of ultrasonic bonding process of thick aluminum wires for power electronic packaging

Ultrasonic Friction Power During Al Wire Wedge-Wedge Bonding

Observation of ultrasonic Al-Si wire wedge bond interface using high resolution transmission electron microscope

Measurement System for Wafer Bonding Strength

Parameter characterization of anodic bonded electrical interconnect in MEMS/NEMS devices

Mechanical Issues of Cu-to-Cu Wire Bonding

Dynamics of Ultrasonic Transducer System for Thermosonic Flip Chip Bonding

Design, Evaluation and Experiment of a Dual-Frequency Ultrasonic Transducer for Aluminum Wedge Bonding

Effect of Contact Interface on Ultrasonic Characteristic of Wire Bond Transducer

Effect of bonding pressure on transducer ultrasonic propagation in thermosonic flip chip bonding