Abstract:High temperature air combustion (HTAC) is a promising technology for energy saving, flame stability enhancement and NOx emission reduction. In a conventional HTAC system, the combustion air is highly preheated by using the recuperative or regenerative heat exchangers. However, such a preheating process is difficult to implement for pulverized fossil fuel fired boilers. In this paper, an alternative approach is proposed. In the proposed HTAC system, a special burner, named PRP burner is introduced to fulfill the preheating process. The PRP burner has a preheating chamber with one end connected with the primary air and the other end opened to the furnace. Inside the chamber, gas recirculation is effectively established such that hot flue gases in the furnace can be introduced. Combustible mixture instead of combustion air is highly preheated by the PRP burner. A series of experiments have been conducted in an industrial scale test facility, burning low volatile petroleum coke and an anthracite coal. Stable combustion was established for burning pure petroleum coke and anthracite coal, respectively. Inside the preheating chamber, the combustible mixture was rapidly heated up to a high temperature level close to that of the hot secondary air used in the conventional HTAC system. The rapid heating of the combustible mixture in the chamber facilitates pyrolysis, volatile matter release processes for the fuel particles, suppressing ignition delay and enhancing combustion stability. Moreover, compared with the results measured in the same facility but with a conventional low NOx burner, NOx concentration at the furnace exit was at the same level when petroleum coke was burnt and 50% less when anthracite was burnt. Practicability of the HTAC technology using the proposed approach was confirmed for efficiently and cleanly burning fossil fuels.

Experimental Study on High Temperature Air Multistage Ignition Combustor

Experimental Study on Pulverized Coal Flow Ignition and Flameout in High Temperature Air

TEST STUDY ON IGNITION DISTANCE OF PULVERIZED COAL FLOW IN THE HIGH-TERMPERATURE AIR

TEST STUDY ON OUTLET FLOW FIELD PERFORMANCE FROM WAVE-SHAPED COMBUSTION-STABILIZING BODY OF THE CONCENTRATION TUNABLE RICH/LEAN BURNERS

RESEARCHES ON THE IGNITION REGULATION OF THE PULVERIZED COAL-AIR FLOW IN A TUBE

OXYGEN-ENRICHED COMBUSTION IN A HORIZONTAL FURNACE AND THREE- DIMENTIONAL NUMERICAL SIMULATION TEST THEREOF

Experimental Research And Numerical Simulation Of Wall Temperature Influence On Multi-Stage Pulverized Coal Ignition

Computational Study of Heat Exchange and Thermal Oxidative Coking of Supercritical-Pressure Kerosene with Compressed Air in Counterflows

Kinetic Study on Co-Combustion of Pulverized Anthracite and Bituminite for Blast Furnace Injection

Development of High Temperature Air Combustion Technology in Pulverized Fossil Fuel Fired Boilers

EXPERIMENTAL STUDY AND NUMERICAL SIMULATION OF TWO-STAGE OIL-LESS IGNITION SYSTEM

Experimental Study of Turbulent Combustion in a Combustor with Staged Air Injection

Flow Characteristic Of A New Type Of Double-Channel Air Burner In Direct Flow Pulverized Coal Boiler

Investigations into the Ignition Behaviors of Pulverized Coals and Coal Blends in a Drop Tube Furnace Using Flame Monitoring Techniques

EXPERIMENTAL STUDY OF EFFECT OF PULVERIZED COAL CONCENTRATION ON COAL IGNITION WITH HOT WALL

Change in Pore Structure of Pulverized Coal Before and After Ignition in High Temperature Air

Development of Concentrated Pulverized Coal Burnerand Multi-concentrated Pulverized Coal Burner

Principle and Experimental Study of Oxygen-Enriched High Temperature Air Combustion Burner

Feasibility and Pressure Dynamics of Novel System for Generating High Temperature Air

Research on High Temperature Air Combustion Technology Via Primary Air Enrichment and Preheating Burner

Study on NO emissions during the coupling process of preheating-combustion of pulverized coal with multi-air staging