Abstract:Experiments were conducted under a hot condition of bituminous coal ignition in a 250 kW pilot-scale bias combustion simulator. The effects of the primary air velocity (PAV) on the ignition characteristics of bias pulverized coal jets in a reducing atmosphere were investigated to develop a better new burner for experimental bituminous coal. Multiple means of measurement and sampling were used for the axial and radial temperatures, flame spectrum, flue gas components, and residual solid inside the furnace. The standoff distance changed nonmonotonically between axial distances of 90 and 330 mm with increasing PAV and was shortest for a PAV of 16 m/s. The radiation heat transfer from the hot environment had more effect on the ignition than the convection heat transfer from high-temperature flue gas in the initial stage, while the convection heat transfer from the high-temperature flue gas played a greater role in the subsequent combustion of the char. At PAVs of 13 and 16 m/s, there was volatile and char homogeneous heterogeneous combined ignition and one-mode combustion; at PAVs of 20 and 23 m/s, there was volatile-phase homogeneous ignition and two-mode combustion. The ignition of the fuel-rich jet lagged that of the fuel-lean jet at a PAV of 13 m/s. A PAV that is lower could not take advantage of bias pulverized coal combustion technology. The ignition of the fuel-rich jet was ahead of that of the fuel-lean jet at PAVs of 16, 20, and 23 m/s. At a PAV of 13 m/s, the position of stable ignition was the shortest, the temperature of stable ignition the highest, and the boundary of the stable flame the smallest. The PAV of 16 m/s provided the best ignition characteristics for bituminous bias pulverized coal jets, which is suitable to be selected as design PAV for the new burner development.

TEST STUDY ON IGNITION DISTANCE OF PULVERIZED COAL FLOW IN THE HIGH-TERMPERATURE AIR

RESEARCHES ON THE IGNITION REGULATION OF THE PULVERIZED COAL-AIR FLOW IN A TUBE

Experimental Study on High Temperature Air Multistage Ignition Combustor

Experimental Study on Pulverized Coal Flow Ignition and Flameout in High Temperature Air

TEST STUDY ON OUTLET FLOW FIELD PERFORMANCE FROM WAVE-SHAPED COMBUSTION-STABILIZING BODY OF THE CONCENTRATION TUNABLE RICH/LEAN BURNERS

OXYGEN-ENRICHED COMBUSTION IN A HORIZONTAL FURNACE AND THREE- DIMENTIONAL NUMERICAL SIMULATION TEST THEREOF

Change in Pore Structure of Pulverized Coal Before and After Ignition in High Temperature Air

Kinetic Study on Co-Combustion of Pulverized Anthracite and Bituminite for Blast Furnace Injection

Study on Factors Influencing Pulverized Coal Ignition Time

Investigations into the Ignition Behaviors of Pulverized Coals and Coal Blends in a Drop Tube Furnace Using Flame Monitoring Techniques

TEST STUDY ON RELATIONSHIP BETWEEN PULVERIZED COAL CONCENTRATION AND IGNITING POINT IN OILLESS IGNITION BURNER

Pulverized Coal Stream Ignition and Combustion Characteristics Based on Multiple Optical Diagnostic Techniques

EXPERIMENTAL STUDY OF EFFECT OF PULVERIZED COAL CONCENTRATION ON COAL IGNITION WITH HOT WALL

Numerical Simulation on Homogeneous Ignition Temperature of Pulverized Coal Group

Study on coal plasma ignition and combustion in a primary combustor

Effect of the Primary Air Velocity on Ignition Characteristics of Bias Pulverized Coal Jets

Experimental Research And Numerical Simulation Of Wall Temperature Influence On Multi-Stage Pulverized Coal Ignition

Effects of Primary Flow Oxygen Concentration on Ignition of Group Coal Particles

High-Temperature Oxygen-Enriched Oil-Free Pulverized Coal Ignition

NUMERICAL SIMULATION OF OIL-FREE IGNITION COMBUSTOR

Investigation of Mechanisms in Plasma-Assisted Ignition of Dispersed Coal Particle Streams