Abstract:This paper focuses on sulfur removal technologies in industrial grate furnaces (IGF) and pulverized coal fired boilers (PCFB) with high flame temperature of 1200-1600 degreesC. The SO2 reduction without sorbents during coal combustion, thermal stabilities of sulfation products, kinetics of sulfur retention reactions of sorbents, desulfurization processes, and sulfur removal under unconventional atmospheres at high temperature are reviewed. It is proposed that some powdered minerals or industrial wastes with effective metal components may be used as sorbents for sulfur removal to promote cost effectiveness. Because the main reason that results in low desulfurization efficiencies in IGF and PCFB is the thermal decomposition of the conventional sulfation product CaSO4 above 1200 degreesC, it is key to explore new sulfation products that are thermally stable at high temperatures. It is also necessary to study the kinetic catalysis of alkali and transitional metal compounds on sulfation reactions under the combustion conditions of IGF and PCFB. The two-stage desulfurization process, in which SO2 is captured by sorbents both in the coal bed and the combustion gas, is promising for IGF, especially with the humidification of flue gas in a water-film dust catcher. The staged desulfurization process combined with air-staged combustion, in which sorbents are injected into the primary air field and upper furnace to capture SO2 under reducing and oxidizing atmospheres, is promising for PCFB. Flue gas recirculation is also an effective desulfurization process under O-2/CO2 conditions and can give a high desulfurization efficiency of about 80% in furnaces. (C) 2003 Elsevier Ltd. All rights reserved.

High-Temperature Sulfur Removal Under Fluidized-Bed Combustion Conditions - A Chemical Interpretation

Sulfur Removal at High Temperature During Coal Combustion in Furnaces: A Review

Experimental Investigation on Sulfur Transformation During Coal Steam Gasification with Ca-based Absorbent

Sorbent performance under FBC conditions-a thermochemical analysis

Sulfur fate during bituminous coal combustion in an oxy-fired circulating fluidized bed combustor

Sorbent Performance under FBC Conditions -- A Thermochemical Analysis

Staged Desulphurization by Direct Sorbent Injection in Pulverized-Coal Boilers

Removal of sulfur at high temperatures using iron-based sorbents supported on fine coal ash

Sulfur Fate During Bituminous Coal Combustion in an Oxy- fired CFB Combustor

Modeling of Sulfur Retention in Circulating Fluidized Bed Coal Combustors

Sulfur Conversion of Mixed Coal and Gangue during Combustion in a CFB Boiler

Effect of Reduction Atmosphere on Sulfur Dioxide Capture in CFB

Sulfur Transformation in the Process of Circulating Fluidized Bed Combustion Combined with Coal Pyrolysis

EXPERIMENTAL STUDIES ON DESULFURIZATION OF CALCIUM BASED SORBENT IN O2/CO2 COAL COMBUSTION

Sulfur Transfer Characteristics and Pyrolysis Simulation in the Coal Polygeneration Process

Study On So2 Removal During Pulverized-Coal Combustion

High temperature desulfurization using fine sorbent particles under boiler injection conditions

Two-Stage Desulfurization Of Calcium-Based Sorbents During Coal Combustion In The Chain-Grate Furnace

Desulfurization Characteristics of Carbide Slag during Circulating Fluidized Bed Coal Combustion

A Study of High Temperature Desulfurization and Regeneration Using Iron-Calcium Oxides in a Fixed-Bed Reactor

Sulfur behavior during coal combustion in oxy-fuel circulating fluidized bed condition by using TG-FTIR