Abstract:Polymer gears pose major advantages, like noiseless operation, resistive against corrosion, low weight, ability to damp vibrations, ease of manufacturability, and ability to operate without lubrication like in printers, household appliances, etc. In order to enhance mechanical properties of gear materials, various reinforcing materials are added such as glass and carbon fibers. The orientation of these fibers and distribution are critical parameters at the microstructural level for polymer reinforced with short fibers, which defines the strength and life of gears. The geometric accuracy and precision of molded gears are improved by the injection molding technique. The fiber orientation prediction is a new and novel aspect for high performance and life, as these injection-molded gears have complex patterns of fiber orientation. This also affects material properties such as elastic modulus, strength, and gear geometrical dimensional properties shrinkage and warpage. In this present work, an attempt is made to develop 3D symmetric spur gear tooth geometry using Autodesk Fusion 360. The injection molding parameters such as fiber orientation tensor, volumetric shrinkage at ejection, weld lines, deflection, and confidence in filling are studied for modeled gear having symmetric teeth profile for unreinforced and 20%, 30%, 40%, 50%, and 60% glass fiber-reinforced nylon 6/6 (PA66) by using Autodesk Moldflow Adviser 2017. The result obtained from mold simulation tool indicates that fiber orientation tensor for varying glass fiber contents was close to unity. The volumetric shrinkage considerably reduced from unreinforced PA66 to glass-reinforced PA66.Graphical abstract.

Calculation of injection molding shrinkage of plastic gears

Finite Element Analysis and Optimal Researchon Plasticizing Capacity of Screws

Hybrid Integration of Taguchi Parametric Design, Grey Relational Analysis, and Principal Component Analysis Optimization for Plastic Gear Production

Influence of gas counter pressure injection molding parameters on shrinkage ratio of plastic part

APPLICATION OF ASYMMETRICAL PROFILE IN INVOLUTE PLASTIC GEAR

Optimization of multiple quality characteristics for injection moulded polyamide helical gear via integration of Taguchi method and Grey relational analysis

Measurement and Research on Deformation of Mold During Plastic Injection Molding

The Influences of Cooling Rate on Shrink and Shrinkage Formation of HDPE Thick Parts

Prediction of injection molding parameters for symmetric spur gear

3D Simulation of Residual Thermal Stress and Shrinkage in Plastic Injection Molding

Influence of reinforcement on composite gear metrology

Study on the design method of interference fit between gear and shaft of automobile transmission

SHRINK AND DEFECT ANALYSIS OF HDPE THICK PART

Modification Method of Gear-Shaped Die Considering Elastic Deformation Behavior

Analysis and Computation for the Clearance of Unsymmetrical Plastic Gear Pair

Size effects on process performance and product quality in progressive microforming of shafted gears revealed by experiment and numerical modeling

Warpage of Injection-Molded Thermoplastics Parts: Numerical Simulation and Experimental Validation

Dimensional Deviations and Distortion Mechanism of Polymer Spur Gear Fabricated by Fused Deposition Modeling

Experimental Study on Effect of Thermal Deformation Parameters on Forming Process of Microgears

Key Technology and Experimental Study of Unequal Pitches Meshing between Metal Worm and Plastic Helical Gears

Numerical Optimization of Shrinkage and Warpage on the Injection Molding Process Parameters of Electrical Connector