Abstract:Bio-nanomaterials are one of the fastest developing sectors of industry and technology. Spider silk, a highly attractive light-weight biomaterial, has high tensile strength and elasticity and is compatible with human tissues, allowing for many areas of application. In comparison to spider silk fibers with diameters of several micrometers, spider mite silk fibers have much smaller diameters of tens of nanometers, making conventional tensile testing methods impractical. To determine the mechanical properties of adult and larval Tetranychus urticae silk fibers, we have performed three-point bending tests with an atomic force microscope. We found that because of the small diameters of these fibers, axial tension—due to both the applied force and a pre-existing strain—has a significant effect on the fiber response, even in the small-deformation limit. As a result, the typical Euler-Bernoulli-Timoshenko theory cannot be applied. We therefore follow the approach of Heidelberg et al. to develop a mechanical model of the fiber response that accounts for bending, an initial tension in the fibers, and a tension due to elongation during testing. This model provides self-consistent results, allowing us to determine that adult and larval fibers have Young's moduli of 24±3 GPa and 15±3 GPa, respectively. Both adult and larval fibers have an estimated ultimate strength of 200–300 MPa and a toughness of order 9 MJ/m3. We note that with increasing interest in the mechanical properties of very high aspect ratio nanomaterials, the influence of pre-existing tension must be considered in any measurements involving a bending test.

Determination of Young’s Modulus of Individual Electrospun Nanofibers by Microcantilever Vibration Method

Mechanical and Electrical Properties of Electrospun CNT/PVDF Nanofiber for Micro-Actuator Applications

Determination of the Young's Modulus of Structurally Defined Carbon Nanotubes.

Novel method for mechanical characterization of polymeric nanofibers

Force-Deflection Spectroscopy: A New Method to Determine the Young'S Modulus of Nanofilaments

Tunable Resonant Frequencies For Determining Young'S Moduli Of Nanowires

Resonant Frequency-Based Method for Measuring the Young’s Moduli of Nanowires

Measurement of the elastic modulus of spider mite silk fibers using atomic force microscopy

A simple method to characterize the electrical and mechanical properties of micro-fibers

Determining Young's modulus via the eigenmode spectrum of a nanomechanical string resonator

Thermal Conductivity of Individual Electrospun Polymer Nanofibers

A Finite Element Method for Determining the Mechanical Properties of Electrospun Nanofibrous Mats

Static micromechanical measurements of the flexural modulus and strength of micrometre-diameter single fibres using deflecting microcantilever techniques

Deformation of isolated single-wall carbon nanotubes in electrospun polymer nanofibres

FORCE-DISTANCE SPECTROSCOPY: A GENERIC METHOD TO DETERMINE THE YOUNG'S MODULUS OF FREESTANDING NANOSTRUCTURES

Carbon Nanotube Fibers: Monitoring a Micromechanical Process in Macroscale Carbon Nanotube Films and Fibers (adv. Mater. 5/2009)

Experimental determination of the Young's modulus of individual single-walled carbon nanotubes with single chirality

Modeling and characterization of the mechanical properties of nanofiber yarn

High Tensile Modulus of Carbon Nanotube Nano-Fibers Produced by Dielectrophoresis

Local mechanical properties of electrospun fibers correlate to their internal nanostructure

Mechanical testing of electrospun PCL fibers