Abstract:Multimaterial optical coatings are a promising viable option to meet the challenging requirements (in terms of transmittance, absorbance, and thermal noise) of next-generation gravitational wave detector mirrors. In this paper we focus on ternary coatings consisting of quarter-wavelength-thick layers, where a third material ( H′ ) is added to the two presently in use, namely, silica ( L ) and titania-doped tantala ( H ), featuring higher dielectric contrast (against silica) and lower thermal noise (compared with titania-doped tantala), but higher optical losses. We seek the optimal material sequences , featuring minimal thermal (Brownian) noise under prescribed transmittance and absorbance constraints, by exhaustive simulation over all possible configurations, for different values of the optical density and extinction coefficient of the third material, including the case of amorphous silicon and silicon nitride operating at ambient and cryogenic temperatures. In all cases studied, the optimal designs consist of a stack of (H′|L) doublets topped by a stack of (H|L) doublets, confirming previous heuristic assumptions, and the achievable coating noise power spectral density reduction factor ranges from ∼0.5 at 290 K down to ∼0.1 at 20 K . The robustness of the found optimal designs against layer thickness deposition errors and uncertainties and/or fluctuations in the optical losses of the third material is also investigated. Possible margins for further thermal noise reduction by layer thickness optimization, and strategies to implement it, are discussed. https://doi.org/10.1103/PhysRevResearch.3.023172 Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI. Published by the American Physical Society

Investigation on Mechanical Losses in Tio2/Sio2 Dielectric Coatings

Mechanical Loss in Tantala/Silica Dielectric Mirror Coatings

TiO2 doping effect on reflective coating mechanical loss for gravitational wave detection at low temperature

Studies on Infrared Absorption Loss of Antireflection Coatings on Germanium and Potassium Chloride Substrates at the Wavelength of 10.6μm by Photothermal Deflection Technique

Measurement of the mechanical loss of a cooled reflective coating for gravitational wave detection

Mechanical loss in state-of-the-art amorphous optical coatings

Amorphous optical coatings of present gravitational-wave interferometers

Structure and morphology of low mechanical loss TiO$_2$-doped Ta$_2$O$_5$

Optical properties of germania and titania at 1064 nm and at 1550 nm

Titania Mixed with Silica: A Low Thermal-Noise Coating Material for Gravitational-Wave Detectors

Optical and mechanical properties of ion-beam-sputtered Nb$_2$O$_5$ and TiO$_2$-Nb$_2$O$_5$ thin films for gravitational-wave interferometers

Thermal Noise Reduction and Absorption Optimisation via Multi-Material Coatings

Ternary quarter wavelength coatings for gravitational wave detector mirrors: Design optimization via exhaustive search

Thermal noise in interferometric gravitational wave detectors due to dielectric optical coatings

Reduction of mechanical losses in ion-beam sputtered tantalum oxide thin films via partial crystallization

High-Reflection Coatings for Gravitational-Wave Detectors: State of The Art and Future Developments

Effects of mixing and annealing on the optical and mechanical properties of TiO$_{2}$:Ta$_{2}$O$_{5}$ amorphous coatings

A Systematic Error in the Internal Friction Measurement of Coatings for Gravitational Waves Detectors

Low mechanical loss and high refractive index in amorphous films grown by magnetron sputtering

Low temperature mechanical dissipation of an ion-beam sputtered silica film

Measurements of a low temperature mechanical dissipation peak in a single layer of Ta2O5 doped with TiO2