Abstract:The traditional tower‐style building (TTSB) is an innovative structural form constructed in modern cities imitating the overall appearance of ancient timber pagodas, and it is an extraordinarily cultured high‐rise construction. The limited stipulations for high‐rise TTSBs in the seismic design code pose challenges in assessing the reliable performance of the unique structure subjected to severe earthquakes. This paper presents the shaking table test and numerical analyses of a 1/15‐scale 13‐story TTSB specimen with an integral tower height of 5.36 m, which is a steel frame‐braced core‐tube structure consisting of seven bright floors (built‐out stories evident from the outside, BF) and six dim floors (built‐in stories not apparent from the outside, DF), with transition columns and stiffening trusses around the exterior perimeter. The experimental results showed that the tested tower‐style building had excellent seismic performance and reliable structural integrity. It only experienced minor damage when subjected to extremely high‐intensity motions. The interstory drift, dynamic strain, and floor acceleration response of the core‐tube region with eccentric steel braces were more significant under severe excitation than those with cross‐centered symmetric steel braces. The vertical reaction increased at the upper floor of the tower under vertical acceleration, and differences in the dynamic response of the middle and upper floors were much more apparent after the test. Moreover, 3D numerical simulation models of the tested tower were established and validated against the test responses. Successively, the validated numerical model was used to investigate the influence of the transition column at different floors on the peak interstory drift response and the relevant strain distribution, and the proposal for a proper position of the transition column was recommended at the end.

Design of a large ship lift tower structural model for shaking table test

Shaking Table Test on Structural Model of a Large Ship Lift Tower

Model Designing and Static Experimental Study on Double Inner and Outer Latticed Shell String Structure

Experimental Study on Dynamical Characteristics of Ship Lift System

Pseudo-dynamic testing of hybrid frame with steel beams bolted to CFT columns

Design method of small scaled shaking table test structural model lacking artificial mass

Model tests on characteristics of ocean and offshore elevated piles with large lateral deflection

Study and Development on Shake Table Tests of Scaled Models of Bridge Engineering

Shaking table test and numerical analysis of an asymmetrical twin‐tower super high‐rise building connected with long‐span steel truss

Shaking Table Model Test of Jinan Olympic Stadium

Analysis for tower-guide-chamber-fluid coupling system of shiplift under longitudinal earthquake

Shaking Table Model Test And Fe Analysis Of A Reinforced Concrete Mega- Frame Structure With Tuned Mass Dampers

Shaking table test and numerical analyses of a multi‐story traditional tower‐style building

Shaking table test for a mid-highrise big-bay RC frame model with special-shaped columns

Shaking Table Test on the Structural Model of Beijing New Poly Plaza

Dynamic model test on monopile for offshore wind turbine under jointed lateral environmental load and seismic load

Shaking table model test analysis of gymnasium building with large span

Study of shaking table substructure test loading by inertial mass

Effects of design and fabrication of segmented ship models on test results of wave-induced loads

Shaking Table Test of Terminal A Structure of Kunming International Airport

Shaking table test and evaluation of a novel high-rise large span concrete cassette structure