Abstract:In comparison with the polymers containing long perfluoroalkyl chains (-CnF2n+1, n ≥ 8), perfluoropolyalkylethers (PFPEs) have been demonstrated to be environmentally friendly polymeric materials. Thus, PFPEs are expected to be alternatives to the long perfluoroalkyl chain polymers. However, due to the poor solubility in common organic solvents they are generally prepared and used in fluorinated solvents, which can also cause harmful impacts on the environment. Therefore, it is urgent to explore a strategy for preparation of high-performance PFPE polymers using environmentally friendly solvents. In this study, three kinds of novel methacrylate macromers bearing PFPE chains with low molar mass were designed and synthesized. The PFPE polymer coatings on polycarbonate plates were obtained by a combinational strategy of spin-coating and in-situ photopolymerization of the macromers under UV-irradiation. The results indicated that the polymer coatings could be prepared in nonfluorinated solvents, such as isopropanol. Then, the surface properties of the polymer coatings were investigated. It was found that the surface properties of the polymer coatings were related to the structures of the polymers. When -CONH-C6H4- as a spacer was incorporated between the backbone and the PFPE chain, the hydrophobicity and oleophobicity of the polymer coatings were significantly enhanced, which is attributed to hydrogen bond and π-π interaction between the PFPE chains. It is obvious that the synergetic effect of hydrogen bond and π-π interaction can facilitate the PFPE chains to form a more stable fluorine-rich surface of the polymer coatings. Therefore, synthesis of the high-performance PFPE polymer has been successfully achieved based on PFPEs using an environmentally friendly solvent.

Plasma-Enhanced Synthesis of Thin Fluoropolymer Layers with Low Raman and Fluorescence Backgrounds

Diamond-Like Carbon Thin-Film Deposition Using A Magnetically Confined Rf Pecvd System

Synthesis Of Fluoroalkyl-Modified Polyester And Its Application In Improving The Hydrophobicity And Oleophobicity Of Cured Polyester Coatings

Synthesis and texturization processes of (super)-hydrophobic fluorinated surfaces by atmospheric plasma

Growth and Characterization of Fluorocarbon Thin Films from Low Pressure Tetrafluoromethane, Hexafluoroethane and Octafluorocyclobutane Plasmas

The stability of radio-frequency plasma-treated polydimethylsiloxane surfaces

Characterization of fluoropolymer films deposited by magnetron sputtering of poly(tetrafluoroethylene) and plasma polymerization of heptadecafluoro‐1‐decene (HDFD) on (100)‐oriented single‐crystal silicon substrates

Fluffy Polyfluoroalkoxy Layer Produced by Air Plasma Spraying Based on “grapeshot” Effect

Deposition of Well‐Defined Fluoropolymer Nanospheres on PET Substrate by Plasma Polymerization of Heptadecafluorodecyl Acrylate and Their Potential Application As a Protective Layer

Fluorocarbon Thin Film with Superhydrophobic Property Prepared by Pyrolysis of Hexafluoropropylene Oxide

Making Modified Fluoropolymer Films with Low Surface Energy

Smooth Transparent Omniphobic Coatings with Remarkable Liquid Repellence

PFAS-free Superhydrophobic Surfaces using Femtosecond Laser Processing and Hot-Filament Chemical Vapor Deposition

Plasma-Stimulated Super-Hydrophilic Surface Finish of Polymers

Highly Alternating Copolymer of [1.1.1]Propellane and Perfluoro Vinyl Ether: Forming a Hydrophobic and Oleophobic Surface with <50% Fluorine Monomer Content

Effect of Non‐Thermal Sulfur Hexafluoride Cold Plasma Modification on Surface Properties of Polyoxymethylene

Synthesis and Characterization of High-Performance Polymers Based on Perfluoropolyalkyl Ethers Using an Environmentally Friendly Solvent

Superhydrophobicity of direct plasma synthesized and deposited thin films: Effect of chemical-induced and substrate roughness

Pulsed Aerosol-Assisted Low-Pressure Plasma for Thin-Film Deposition

Tailor-Made Fluorinated Copolymer/Clay Nanocomposite by Cationic RAFT Assisted Pickering Miniemulsion Polymerization

Study of High Quality Hydrophobic Fluorocarbon Polymer Films Grown by Inductive Coupled Plasma Chemical Vapor Deposition