Abstract:Artificial superhydrophobic coatings with mechanical stability, chemical stability, and strong adhesion have been achieved separately. However, a simultaneous demonstration of these features along with stability to high-temperature exposure is challenging. Herein, inspired by the micro/nanoscale hierarchical superhydrophobic surfaces of solid cactus plants, we propose a novel plasma-enhanced high temperature liquid-phase-assisted oxidation and crosslinking (PHLOC) in-situ co-growth strategy to design superhydrophobic nanocomposite coatings on metals based on organic–inorganic multilayer structures in which PTFE nanoparticles cross-linked to form a compact top layer with hierarchical surface textures on a ceramic skeleton with a papilla array, integrating multiple robust wettability characteristics with mechanochemical strength to isolate the underlying materials from the external environment. Remarkably, the superhydrophobic coating exhibits strong mechanical robustness undergoing the 120th linear abrasion or 40th rotary abrasion cycle and can be applied on large area and arbitrary shapes of metal substrates. Moreover, the samples sustain exposure to highly corrosive media, namely, aqua regia, sodium hydroxide solutions, and simulated seawater solution, to reflect long-term chemical robustness. More importantly, the multilayer coating demonstrates excellent high-temperature endurance, thermal cycling stability of 500 °C, and thermal repairability of superhydrophobicity. With multifaceted robustness and scalability, the superhydrophobic multilayer coating should find potential usage in the field of high-tech equipment with severe alternating or impact loads, high-temperature service, and chemical corrosion.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10539?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10539</a>.Design strategy and application prospect, adhesion strength, mechanical robustness, interfacial inhibition effect, interfacial interaction, corrosion behavior, SEM and bonding strength, water droplets bouncing, self-cleaning, liquid impalement resistance, service performance, and comparison with existing superhydrophobic materials (Supplementary Text 1–12); PEOFH superhydrophobic coating, surface morphologies, cross-sectional morphology and element distribution, scratching methods, contact angles, abrasion mechanisms, potentiodynamic polarization curves, electrochemical impedance spectra, SEM images, photographs of coatings, time-lapse photographs, self-cleaning tests, liquid impalement resistance, weatherability and sustained superhydrophobicity, service performance, and properties of advanced materials (Supplementary Figure S1–S16); element distribution, fitting curves, and impedance parameters (Supplementary Table S1–S3); and the Reference List (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10539/suppl_file/am0c10539_si_001.pdf">PDF</a>)Cyclic rotary abrasion experiments; water droplet traveling test and large water flow impact experiment after the 120th linear cycle and 40th rotational cycle; water droplet guided to travel on the coating surface after abrasion cycles; water droplets roll at will on the coating surface after 510 °C for 1.5 h; water droplet bouncing test; self-cleaning experiments; and coating withstands water flow impact with a velocity of 5.2 m/s (Movies S1–S10) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10539/suppl_file/am0c10539_si_002.zip">ZIP</a>)This article has not yet been cited by other publications.

Superhydrophobicity of direct plasma synthesized and deposited thin films: Effect of chemical-induced and substrate roughness

Synthesis and texturization processes of (super)-hydrophobic fluorinated surfaces by atmospheric plasma

Analysis of time-dependent hydrophobic recovery on plasma-treated superhydrophobic polypropylene using XPS and wettability measurements

Research Progress of Superhydrophobic Surface Prepared by Plasma Spraying

Design and High-Resolution Characterization of Silicon Wafer-like Omniphobic Liquid Layers Applicable to Any Substrate.

Preparation of High Wear-Resisting Superamphiphobic Robust Film by Self-Assembled Monolayer Surface Reaction

Single-step fabrication of superhydrophobic surfaces by two-photon polymerization micro 3D printing

Effect of the Geometrical Structure on the Superhydrophobicity and Self-Cleaning Properties of Plasma-Treated Polyvinylidene Fluoride Fabrics.

Imparting Superhydrophobicity with a Hierarchical Block Copolymer Coating

Robust Superhydrophobic Surfaces Prepared with Epoxy Resin and Silica Nanoparticles

Superhydrophobic Surface by Laser Ablation of PDMS

Production of an EP/PDMS/SA/AlZnO Coated Superhydrophobic Surface through an Aerosol-Assisted Chemical Vapor Deposition Process

Superhydrophobic hierarchical honeycomb surfaces

Fabrication of pillar-array superhydrophobic silicon surface and thermodynamic analysis on the wetting state transition

Facile fabrication of self-roughened surfaces for superhydrophobic coatings via polarity-induced phase separation strategy

Fast Cross-scale Preparation of Water-repellent Hierarchical Surface via Atmospheric air Plasma for Water-in-oil Emulsion Separation

Analysis of wetting properties of microstructured polymer surfaces to achieve superhydrophobic properties

Plasma modification of carbon nanowalls induces transition from superhydrophobic to superhydrophilic

Plasma-Stimulated Super-Hydrophilic Surface Finish of Polymers

Robust Superhydrophobic Surfaces via the Sand-In Method

Scalable-Manufactured Superhydrophobic Multilayer Nanocomposite Coating with Mechanochemical Robustness and High-Temperature Endurance