Abstract:Poor durability prominently limits the application of superhydrophobic coatings. In this study, a super-hard superhydrophobic Fe-based amorphous alloy coating was prepared on Q235 steel substrate via plasma spraying and further surface modification with heptadecafluoro-1,1,2,2-tetrahydro-decyl-1-trimethoxysilane (FAS17). The SEM observation showed that the coating surface feature varied with plasma spray power. The coating with a spray power of 30kW has a triple-level hierarchical surface feature with no-flattening particles in dozens of micron size, adherent splashing particles in several micron size, and wool-like oxides with nano size. The corresponding water contact angle and sliding angle were 154°±2° and 4°±1°, respectively. The X-ray diffraction results revealed that the coatings have amorphous structure; however, the crystallization and oxidation may occur with increasing spray power. The energy dispersive spectroscopy result confirmed that the nano wool-like oxides comprise multi metal oxides, in which Fe, C, and Mo dominated. The adherent splashing particles were rarely found at 15kW, whereas the wool-like oxides were not at all observed at 15 and 22.5kW. Thus, the hydrophobicity decreased when the spray power increased. The X-ray phosphorescence spectroscopy test verified the chemical bonding of FAS17 and coatings. In addition, in virtue of super-high microhardness of 884±61HV0.1, the superhydrophobic coating at 30kW spray power displayed excellent anti-wear property under a pressure as high as 10kPa.

Fluffy Polyfluoroalkoxy Layer Produced by Air Plasma Spraying Based on “grapeshot” Effect

Features of Composite Layers Created Using an Aqueous Suspension of a Fluoropolymer

Spray-coating process in preparing PTFE-PPS composite super-hydrophobic coating

Fabrication and characterization of stable superhydrophobic fluorinated-polyacrylate/silica hybrid coating

A fluorine-free and nanoparticle-free superhydrophobic coating: A mechanism and self-cleaning application investigation

Preparation of Fluoroalkyl-Acrylate-Modified Polysiloxane Nanocomposite and Its Surface Properties as a Superhydrophobic Coating Material

Synthesis and texturization processes of (super)-hydrophobic fluorinated surfaces by atmospheric plasma

Superhydrophobic Surfaces Fabricated by Spray-Coating Micelle Solutions of Comb Copolymers

Superhydrophobic coatings based on thermally and chemically stable fluorinated poly(aryl ether)/SiO2/carbon nanotube

Fluoroalkyl Polyhedral Oligomeric Silsesquioxane Initiated Methylmethacrylate Polymer to Produce Hydrophobic Coatings by Low Fluorine Content

Construction of Plasma Sprayed Surfaces with Various Scales and the Effect on Hydrophobicity

Facile Fabrication of Super-Hydrophobic Surfaces by Spray PTFE

A Super-Hard Superhydrophobic Fe-based Amorphous Alloy Coating

Fluorocarbon Thin Film with Superhydrophobic Property Prepared by Pyrolysis of Hexafluoropropylene Oxide

Preparation of Polytetrafluoroethylene Superhydrophobic Materials by Femtosecond Laser Processing Technology

Improvement of the deposition efficiency and adhesion strength of cold sprayed fluoropolymer coating by laser surface texturing of the substrate

Preparation and properties of polytetrafluoroethylene superhydrophobic surface

Higher Water Repellency Caused by a Reduced Employment of Low Surface Energy Structures

PFAS-free Superhydrophobic Surfaces using Femtosecond Laser Processing and Hot-Filament Chemical Vapor Deposition

Superhydrophobic Surface on Arc-Sprayed Aluminum Coating Via Fluorinated Polyurethane Modification: Preparation and Application in Corrosion Protection

Mechanically Robust Superhydrophobic Coating for Aeronautical Composite Against Ice Accretion and Ice Adhesion