Abstract:The electrocatalytic carbon dioxide reduction reaction (CO2RR) that produces liquid formic acid (FA) is one potential route to minimize the CO2 concentration in the atmosphere by utilizing CO2 as a feedstock. However, one of the main disadvantages of this route is the high energy demand required for purification through conventional distillation. This method of purification has been shown to result in a large carbon footprint in life-cycle analysis (LCA). Therefore, finding an alternative purification technique that can integrate with an electrochemical CO2RR process with the potential to lower the carbon footprint would be of great interest. Under the experimental conditions of the CO2RR, FA remains in its basic form as the formate anion in the catholyte. Anion exchange resins with their basic properties can separate the formate anion from the catholyte mixture as an alternative to energy intensive distillation. In this work, three anion exchange resins with increasing basicity order: Amberlite IRA-96 < Amberlite IRA-910 < Ambersep 900 are tested to separate FA in the presence of aqueous solution of potassium bicarbonate catholyte with varying levels of resin and FA. Kinetics and equilibrium studies data for the FA adsorption are interpreted using several kinetics and isotherm models. The kinetics data fit well with a pseudo-first-order model at high initial FA concentrations and a pseudo-second-order model at low initial FA concentrations. The experimental data can be best explained with the Freundlich isotherm model. The fitted results show that strongly basic Ambersep 900 is more effective at separating FA, with a maximum adsorption capacity of 336.7 mg/g compared to Amberlite IRA-96 (275.2 mg/g) and Amberlite IRA-910 (209.2 mg/g) in neutral water. However, weakly basic Amberlite IRA-96 (110.8 mg/g) can separate FA more efficiently from potassium bicarbonate catholyte than Amberlite IRA-910 (99.9 mg/g) and Ambersep 900 (40.0 mg/g). Competitive adsorption occurs in the presence of potassium bicarbonate catholyte, but the formic acid adsorption capacity is still sufficient for adequate separation.

Fixed-Bed Adsorption Study for Fumaric Acid Removal from Aqueous Solutions by Amberlite Ira-400 Resin

Simulation of Levulinic Acid Adsorption in Packed Beds Using Parallel Pore/Surface Diffusion Model

Treatment of Fumaric Acid Wastewater Using Integrated Process of Hollow-Fiber Supported Liquid Membrane-Strip Dispersion with Reverse Osmosis

Dynamic-State Adsorption and Elution Behaviour of Uranium(VI) Ions from Seawater by a Fibrous and Porous Adsorbent Containing Amidoxime Chelating Functional Groups

A mass transfer model for the fixed-bed adsorption of ferulic acid onto a polymeric resin: axial dispersion and intraparticle diffusion

A high efficient method for simultaneous fermentation and separation of fumaric acid with a fixed bed ion exchange column

Recovery of fumaric acid by hollow-fiber supported liquid membrane with strip dispersion using trialkylamine carrier

Adsorption characteristics of o-phthalic acid and its separation by resins from maleic acid and fumaric acid in wastewater

Adsorption Characteristics of Fumaric Acid onto Weakly Basic Hypercrosslinked Polystyrene Ion-exchangers

Downstream Separation of Formic Acid with Anion-Exchange Resin from Electrocatalytic Carbon Dioxide (CO 2 ) Conversion: Adsorption, Kinetics, and Equilibrium Modeling

Kinetics and Optimization of L-Tryptophan Separation with Ion-Exchange Chromatography

Adsorption and Desorption of Aqueous Acid Fuchsine on Ferrihydrite

Study on Adsorption of Rhenium by F-2 Resin

Highly selective adsorption of 5-hydroxymethylfurfural from multicomponent mixture by simple pH controlled in batch and fixed-bed column studies: Competitive isotherms, kinetic and breakthrough curves simulation

Enhanced Adsorption And Antifouling Performance Of Anion-Exchange Resin By The Effect Of Incorporated Fe3o4 For Removing Humic Acid

Adsorptive Removal of Emerging Polyfluoroalky Substances F-53B and PFOS by Anion-Exchange Resin: A Comparative Study.

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

Effects of aerosol scattering phase function formulation on point-spread-function calculations.

Fixed-bed adsorption kinetics study of plant total flavonoids based on a flow-injection online spectrophotometric method

Adsorption of uranium on amino functionalized acrylonitrile anion exchange resin

Removal of fulvic acids using the surfactant modified zeolite in a fixed-bed reactor