Abstract:The electrocatalytic carbon dioxide reduction reaction (CO2RR) that produces liquid formic acid (FA) is one potential route to minimize the CO2 concentration in the atmosphere by utilizing CO2 as a feedstock. However, one of the main disadvantages of this route is the high energy demand required for purification through conventional distillation. This method of purification has been shown to result in a large carbon footprint in life-cycle analysis (LCA). Therefore, finding an alternative purification technique that can integrate with an electrochemical CO2RR process with the potential to lower the carbon footprint would be of great interest. Under the experimental conditions of the CO2RR, FA remains in its basic form as the formate anion in the catholyte. Anion exchange resins with their basic properties can separate the formate anion from the catholyte mixture as an alternative to energy intensive distillation. In this work, three anion exchange resins with increasing basicity order: Amberlite IRA-96 < Amberlite IRA-910 < Ambersep 900 are tested to separate FA in the presence of aqueous solution of potassium bicarbonate catholyte with varying levels of resin and FA. Kinetics and equilibrium studies data for the FA adsorption are interpreted using several kinetics and isotherm models. The kinetics data fit well with a pseudo-first-order model at high initial FA concentrations and a pseudo-second-order model at low initial FA concentrations. The experimental data can be best explained with the Freundlich isotherm model. The fitted results show that strongly basic Ambersep 900 is more effective at separating FA, with a maximum adsorption capacity of 336.7 mg/g compared to Amberlite IRA-96 (275.2 mg/g) and Amberlite IRA-910 (209.2 mg/g) in neutral water. However, weakly basic Amberlite IRA-96 (110.8 mg/g) can separate FA more efficiently from potassium bicarbonate catholyte than Amberlite IRA-910 (99.9 mg/g) and Ambersep 900 (40.0 mg/g). Competitive adsorption occurs in the presence of potassium bicarbonate catholyte, but the formic acid adsorption capacity is still sufficient for adequate separation.

A mass transfer model for the fixed-bed adsorption of ferulic acid onto a polymeric resin: axial dispersion and intraparticle diffusion

Simulation of Levulinic Acid Adsorption in Packed Beds Using Parallel Pore/Surface Diffusion Model

Predictive Modeling of Protein Adsorption along the Bed Height by Taking into Account the Axial Nonuniform Liquid Dispersion and Particle Classification in Expanded Beds

Measurement and modeling of axial distribution of adsorbent particles in expanded bed: taking into account the particle density difference

Variation of the Axial Dispersion along the Bed Height for Adsorbents with a Density Difference and a Log-Normal Size Distribution in an Expanded Bed

Parallel Pore and Surface Diffusion of Levulinic Acid in Basic Polymeric Adsorbents.

Fixed-Bed Adsorption Study for Fumaric Acid Removal from Aqueous Solutions by Amberlite Ira-400 Resin

Recovery of fumaric acid by hollow-fiber supported liquid membrane with strip dispersion using trialkylamine carrier

Experimental and Mathematical Simulation of Noncompetitive and Competitive Adsorption Dynamic of Formic Acid–Levulinic Acid–5-Hydroxymethylfurfural from Single, Binary, and Ternary Systems in a Fixed-Bed Column of SY-01 Resin

Competitive Adsorption of Phenolic Compounds Onto Activated Carbon Fibers in Fixed Bed

Adsorption Characteristics of Fumaric Acid onto Weakly Basic Hypercrosslinked Polystyrene Ion-exchangers

Highly selective adsorption of 5-hydroxymethylfurfural from multicomponent mixture by simple pH controlled in batch and fixed-bed column studies: Competitive isotherms, kinetic and breakthrough curves simulation

Adsorption of ferulic acid from an alkali-pretreated hydrolysate using a new effective adsorbent prepared by a thermal processing method

Advanced Characterization of Polyphenol Fixed-Bed Adsorption Kinetics Applying Flow-Injection Online Analysis

Fixed-bed adsorption kinetics study of plant total flavonoids based on a flow-injection online spectrophotometric method

Continuous silicic acid removal in a fixed-bed column using a modified resin: Experiment investigation and artificial neural network modeling

Modeling and simulation of continuous fixed adsorptive distillation with adsorbent regeneration using thermal desorption

Removal of fulvic acids using the surfactant modified zeolite in a fixed-bed reactor

Adsorption Model Development for Mass Transport Characteristics of MFEP Structure by Physisorption Method

Downstream Separation of Formic Acid with Anion-Exchange Resin from Electrocatalytic Carbon Dioxide (CO 2 ) Conversion: Adsorption, Kinetics, and Equilibrium Modeling

Fixed Bed Adsorption Study on Phosphate Removal Using Nanosized FeOOH-modified Anion Resin