Zeolite-based absorbent: Polyacrylic acid loading for enhanced ferric(III) removal from aqueous solution
Junjie Zhou,Hongguo Ma,Lvyu Chen,Xudong Ding,Yuchun Fang,Jianlin Pan,Hongdi Wang,Bin Tan,Jian Zhou
DOI: https://doi.org/10.1016/j.jece.2024.114317
IF: 7.7
2024-10-03
Journal of Environmental Chemical Engineering
Abstract:The process of adsorption shows promise as an effective method for water purification due to its cost-effectiveness, reusability, and adaptability in treating various metal ions. However, it has been noted that this method has limited Fe(III) removal capacity and is susceptible to interference from co-existing ions. To address this, a new adsorbent material (ZEO-PAA) was developed by loading polyacrylic acid (PAA) onto NaOH-treated zeolite using γ-Glycidoxypropyltrimethoxysilane (GPTMS) as a linker. In comparison to natural zeolite, ZEO-PAA demonstrates a strong affinity for Fe(III), exhibiting remarkable Fe(III) removal performance even in the presence of other common cations, such as Na(I), Ca(II), and Mg(II). Furthermore, ZEO-PAA maintains high adsorption performance for heavy metal ions such as Pb(II), Cu(II), Ni(II), Cd(II), and Cr(III). After 7 cycles of adsorption/regeneration, the Fe(III) removal rate of ZEO-PAA remains over 85 %. The adsorption process of ZEO-PAA for Fe(III) aligns with the Langmuir isotherm model and PSO Kinetics model, with a maximum adsorption capacity ( q m ) of 37.53 mg/g. This study provides valuable insights into the development of a reusable adsorbent material, demonstrating great potential for practical water treatment.
engineering, chemical, environmental