Extraction of alumina from aluminum dross by a non-hazardous alkaline sintering process: Dissolution kinetics of alumina and silica from calcined materials
Liuqing He,Lin Shi,Qizhen Huang,Waseem Hayat,Zhongbo Shang,Tengfei Ma,Min Wang,Weidong Yao,Haoyong Huang,Rui Chen
DOI: https://doi.org/10.1016/j.scitotenv.2021.146123
2021-07-01
Abstract:The aluminum dross (AD), which causes numerous problems of its management and disposal to environment is a useful resource to extract alumina. This study explains a novel process to extract highly pure alumina (Al<sub>2</sub>O<sub>3</sub>) from AD at a high extraction rate without producing the residues and exhaust gases. An experimental set up was designed to perform the grinding of AD for the decomposition of aluminum nitride (AlN) and the removal of salts. Thereby, the desalted dross was used to detect the optimum alkaline (NaOH) calcination parameters and leaching conditions, as well as the dissolution kinetics of alumina and silica. The leaching residues were used to produce Ettringite mineral with calcium-based compounds (including CaO and CaSO<sub>4</sub>) to avoid the problems of solid waste disposal from the leaching process. Moreover, to purify the alumina, slightly soluble CaSO<sub>4</sub> was added in leaching solution to precipitate silicate and the optimum additive/solution ratio (g/mL) was determined. The aluminum hydroxide (Al(OH)<sub>3</sub>), precipitated after the carbonization was calcinated at 900.0 °C for 2 h to produce γ-alumina. The morphological and mineralogical characterizations of AD, γ-Al<sub>2</sub>O<sub>3</sub> and the synthesized Ettringite mineral were studied by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and X-ray fluorescence (XRF). It was observed that activation temperature of 1000.0 °C, Na<sub>2</sub>O/Al<sub>2</sub>O<sub>3</sub> molar ratio of 1.4, leaching temperature of 60.0 °C, leaching time of 40.0 min, and the leaching liquid/solid ratio (mL/g) of 25/1 were the optimal parameter conditions to extract alumina with the extraction rate at 86.7% and purity of more than 98%. The results of leaching kinetics' study showed that the dissolution of alumina and silica were both controlled by layer diffusion process with the apparent activation energy of 11.4010 kJ·mol<sup>-1</sup> and 2.0556 kJ·mol<sup>-1</sup>, respectively.
environmental sciences