The Highly Active Catalysts of Nanometric CeO2-supported Cobalt Oxides for Soot Combustion
Jian Liu,Zhen Zhao,Jiqiu Wang,Chunming Xu,Aijun Duan,Guiyuan Jiang,Qing Yang
DOI: https://doi.org/10.1016/j.apcatb.2008.03.017
2008-01-01
Abstract:Nanometric CeO2-supported cobalt oxide materials with variable Co/Ce atomic ratios were prepared by the method of ultrasonic-assisted incipient-wetness impregnation. The catalytic behaviors of a series of CoOx/nmCeO2 catalysts have been studied for soot combustion. XRD, XPS, Raman, UV–vis DRS and FT-IR spectroscopy characterization results indicated that CoO or cobalt–cerium solid solutions were formed in the samples with the low Co loading amount, while Co3O4 was formed in the samples with high Co loading amount. CoOx/nmCeO2 catalysts can further promote soot combustion in contrast to nanometric CeO2. This improvement is related to the increase in the redox properties of the catalysts brought about by loading cobalt oxide on nanometric CeO2. The TPR experiment results under hydrogen atmosphere indicated that the presence of Co decreases the reduction temperature of catalyst from 555°C (nanometric CeO2) to 286°C (Co20/nmCeO2). On the other hand, attributing to nanoparticle effect and NO2 formation, Com/nmCeO2 oxide catalysts prepared in this study have very high activity for soot combustion. The best catalytic activity was obtained over Co20/nmCeO2 catalyst that T10, T50, T90 were 286°C, 368°C, 418°C, respectively, and SCO2m was 98.8%. Compared with the blank case (i.e., without catalyst) for soot combustion, T50 decreased by more than 200°C and SCO2m increased by 40% point. And this catalytic activity for the combustion of soot particle is as good as supported Pt catalysts, which is the best catalyst system so far reported for soot combustion under loose contact conditions. This temperature of soot combustion can ensure immediate activation of the catalyst on the filter under the conditions of diesel engine emissions.