Abstract:For the fracture problem of structural steel under strong earthquakes, a continuous damage model which comprehensively considers the influence of stress triaxiality and Lode parameter was proposed in this paper. According to the variation law of Mises stress under cyclic loading, this model decomposes the effective cumulative plastic strain into isotropic hardening and kinematic hardening components, assuming a linear proportional relationship between the fatigue damage induced by these two components. The basic mechanical properties and constitutive relationships of five common Chinese structural steels and four corresponding weld metals were investigated. The fracture failure tests for both notched round bar specimens and pure shear specimens subjected to monotonic tensile and ultra-low-cyclic loading were thoroughly examined on these materials. The continuous damage model parameters were calibrated by means of test results and complementary finite element simulations. Experimental and numerical simulation results indicate that Q690 high strength steel exhibits cyclic softening behavior, whereas the other steels show cyclic hardening characteristics. For pure shear specimens, plane strain specimens and shear energy dissipation cover plates, the continuous damage model was adopted to simulate and analyze the damage development and fracture failure process of the specimens. The predictions for crack initiation, crack propagation and fatigue life are consistent with experimental results, lending further credibility to the model. The calibrated continuous damage model of various steels provides an effective means for analyzing the ULCF fracture failure of structural steel under intense earthquakes.

A Continuous Low Cycle Fatigue Damage Model and Its Application in Engineering Materials

A Model for Ultra Low Cycle Fatigue Damage Prediction of Structural Steel

Study on the Prediction Method of the Ultra-Low-Cycle Fatigue Damage of Steel

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

A Life Prediction Model for Low Cycle Fatigue Based on Continuum Damage Mechanics

Cumulative damage model for steel weld under low-cycle fatigue

Anisotropic Damage Model under Continuum Slip Crystal Plasticity Theory for Single Crystals

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

A Modified Microstructure-Based Creep Damage Model for Considering Prior Low Cycle Fatigue Damage Effects

A Model of Continuum Damage Mechanics for High Cycle Fatigue of Metallic Materials

Continuum Damage Model of Low-Cycle Fatigue and Fatigue Damage Analysis of Welded Joint

Low Cycle Fatigue Damage Evolution & Life Estimate of 10CrMo910 Steel

A Continuum Damage Mechanics Approach for Fatigue Life Prediction of Open-Hole Metallic Plate

Low-Cycle Fatigue Life Prediction Of 10crni3mov Steel And Undermatched Welds By Damage Mechanics Approach

Continuum Damage Mechanics Based Fatigue Life Prediction and Fatigue Property Analysis of Pitting Corrosion Steel Bars

Investigation of low cycle fatigue crack propagation behavior of 316H steel at 550°C based on cyclic response and damage accumulation: experiment and modelling

Investigation of Low Cycle Fatigue Crack Propagation Behavior of 316H Steel at 550℃ Based on Cyclic Response and Damage Accumulation: Experiment and Modelling

A study on fatigue damage accumulation based on continuum damage mechanics

Continuous damage model for structural steels and weld metals under ultra-low-cyclic loading

A Continuum Damage Model for Weld Heat Affected Zone under Low Cycle Fatigue Loading

A NEW NON-LINEAR CONTINUUM DAMAGE MECHANICS MODEL FOR THE FATIGUE LIFE PREDICTION UNDER VARIABLE LOADING