Abstract:In this study, a gasified thermal carrier assisted vapor deposition technique has been used to deposit titanium dioxides thin films of 90, 270, and 480 nm, thicknesses on glass substrates at growth times of 1, 2, and, 3 hours respectively. Varied nondestructive techniques were employed to investigate the impacts of deposition time on the structural, optical, and electrical properties of the TiO 2 thin films. X-ray diffraction (XRD) showed that crystals of a polycrystalline nature were preferentially oriented along the (101) direction. The analysis of the chemical composition of the films by energy-dispersive X-ray (EDX) spectroscopy demonstrated very pure TiO 2 thin films that were free of contamination and impurities. The SEM images indicated that the TiO 2 thin films were cluster forms, with increasing sizes of with the growth times of 1, 2, and, 3 hours, and these times produced thicknesses of 90, 270, and 480 nm, respectively. The study of the optical properties using ultraviolet-visible (UV-Vis) spectroscopy revealed a thickness-inverse relationship between the films’ optical transmittance levels (from 92% to 78%) and their corresponding energy bandgaps. The electrical properties of the TiO 2 films were analyzed via a Hall effect measurement system. The electrical resistivity levels of the films were highly correlated with the thicknesses of the films. The lowest value of electrical resistivity for the highest thinness was 55×10 3 Ω· cm. The films showed high densities of carriers, with concentrations of 85×10 12 to 35×10 13 N (cm −3 ), and sufficiently low shift resistance levels. According to the obtained results, three hours, which led to the growth of a 270 nm thickness, could be considered as the ideal deposition time for TiO 2 thin films for solar cell applications.

Selective Deposition of Titanium Dioxide Thin Film on Glass Monolayers by Impregnating Method

Crystallization Behavior and Hydrophilic Performances of V2O5–TiO2 Films Prepared by Sol–gel Dip-Coating

Preparation of TiO2 Films on Self-Assembled Monolayers by Sol–gel Method

Fabrication of Titanium Dioxide Thin Films by DBD-CVD under Atmosphere

OTS Self-Assembled Monolayer on Functionalization Glass and Patterning on Titanium Surface

Structure and hydrophilicity of titanium dioxide film prepared by atmospheric pressure chemical vapor deposition

Atomic layer deposition of TiO2 on mesoporous silica

Characterization of TiO2 film prepared by sol-gel method using Ti(OC4H9)4

A bi-layer glass-coating for low-e property and photocatalytic activity

Impact of Thickness of Columnar Crystal TiO2 Film on Photocatalytic Activity of FTO/TiO2 Coated Glass

The Study on the Preparation of Titanium Dioxide Thin Film by Liquid Phase Deposition Method

Study of Self-Cleaning and Low-Emission Properties of FTO/TiO2 Composite films

Effect of Deposition Conditions on TiO2 Thin Film on Silica Glass Fibers by Liquid Phase Deposition

Study of Titanium Dioxide Thin Film by Sol-Gel Method

Nucleation and Growth of Tisi2 Thin Films Deposited on Glass by Atmospheric Pressure Chemical Vapor Deposition

Hydrophilic Titania Thin Films from a Molecular Precursor Film Formed via Electrospray Deposition on a Quartz Glass Substrate Precoated with Carbon Nanotubes

Characterization of Titanium Dioxide Thin Films Grown on Glass Substrate by Gasified-Thermal-Carrier-Assisted Evaporation Technique: Impact of Deposition Time

Surface Characterization of Thin Titania Films Prepared at Low Temperatures

(Invited) Pure Anatase Phase Titanium Dioxide Thin Films Prepared by Mist Chemical Vapor Deposition Applying for Photocatalysis

Fabrication of TiO2 ̶ KH550 ̶ PEG Super-Hydrophilic Coating on Glass Surface without UV/Plasma Treatment for Self-Cleaning and Anti-Fogging Applications

Synthesis studies of sputtering TiO2 films on poly(dimethylsiloxane) for surface modification