The Continuous Desulfurization of Fcc Gasoline Through Extraction and Photocatalysis-Oxidation
Y. -R. Xu,B. Shen,L. Wang,X. Wu
DOI: https://doi.org/10.1080/15567030903397925
2011-01-01
Energy Sources Part A Recovery Utilization and Environmental Effects
Abstract:Removal of sulfur-containing compounds from gasoline, based on the combination of various technologies (liquid-liquid extraction and extraction-photocatalysis-oxidation desulfurization) using a biphasic system (oil/acetonitrile) has been investigated. The effect of operation conditions on desulfurization rates and the distribution coefficient in a model system for gasoline were explored. Additionally, extraction-desulfurization kinetics are studied through simulation; the kinetics equation, (-r(A)) = 7.1c(A)(0.008), was obtained. Experimental results show that the proper extraction conditions are: diluents content, 0.01-0.05; solvent/oil ratio, 1.5-2.5; and extraction temperature, 30-50 degrees C. A successive removal of these sulfur compounds is carried out through photoirradiating in the solvent phase to form highly polarized compounds from fuel oils with a solvent. The operation conditions include a temperature of 30-50 degrees C, atmospheric pressure, and the ratio of oxidation agent/oil of 0.01-0.005 over our home-made catalyst. Sulfur contents in the fuel oils are reduced to less than 10 mu g/g. In addition, the photocatalysis kinetics were worked out to be (-r(A)) = 0.4221c(A) - 12.01. On the basis of the above results, an integrated overall refining process for sulfur removal from fluid catalyst cracking gasoline has been developed.