Abstract:Herein, a series of alumina supports were prepared by rehydration-dehydration of the traditional gamma-Al2O3 under different hydrothermal temperatures. After loading CoMo species, it was found the selectivity factor of corresponding CoMo/Al2O3 catalysts was improved greatly from 1.21 to 2.51 with the increased hydrothermal temperature of alumina supports in the hydrodesulfurization (HDS) of a model fluid catalytic cracking (FCC) naphtha. The improved HDS selectivity is attributed to the weakened metal-support interaction and lowered dispersion of MoS2 particles, resulting in catalysts with larger edge-to-corner ratios of CoMoS slabs ((f(e)/f(c))(CoMo)). Besides, the recombination mercaptans formed by reaction of produced H2S and olefins were found as a big challenge to reach a high HDS conversion (S < 10 ppm) when only using the selective HDS catalyst (one-unit process). Therefore, a two-unit process has been developed by using a selective HDS catalyst to remove the most of the refractory sulfur compounds firstly, after which using another mercaptan-removing catalyst to deal with the recombination mercaptans specially. The catalytic results show that the two-unit process has a smaller olefin loss (4.38 v%) than that of one-unit process (7.08 v%) when reducing the sulfur concentration of a heavy FCC fraction to less than 10 ppm, thus resulting in a 0.7 unit less of the research octane number loss. The present work shows that high HDS conversion and low olefin hydrogenation conversion in selective HDS of FCC gasoline can be achieved through optimization design of both the selective HDS catalyst and the whole technology.

Advances in Kinetics of Selective Hydrotreating Reaction for FCC Gasoline

Progress in Catalyst and Technique of Deep Hydrodesulfurization for Vehicle Fuels

Advances in Ultra-Deep Hydrodesulfurization of Diesel over Catalysts

Development of New Generation Catalysts for Selective Hydrodesulfurization of Fcc Naphtha

TECHNICAL PROGRESS IN HYDRODESULFURIZATION

Effect of Methanol on Catalytic Performance of Hy Zeolite for Desulfurization of Fcc Gasoline by Alkylation

Kinetics toward mechanism and real operation for ultra‐deep hydrodesulfurization and hydrodenitrogenation of diesel

Selective Hydrodesulfurization Technology of Cracked Gasoline for Gasoline Pool in 2005

Development of Technologies to Hydrodesulfurization and Olefin-reducing for FCC Gasoline

FCC-Hydrotreating Synergy Improve Refinery Economics

Molecular Level Simulation of the Conversion and Distribution of Sulfides in the Fluid Catalytic Cracking and Hydrotreating Processes to Improve the Cleanliness of Gasoline and Diesel

Optimizing Both the CoMo/Al2O3 Catalyst and the Technology for Selectivity Enhancement in the Hydrodesulfurization of FCC Gasoline

STUDY ON HYDROGENATION OF UNSATURATED HYDROCARBON DURING FCC GASOLINE DESULFURIZATION BY S Zorb PROCESS

Progress of Catalysts for Deep Hydrodesulfurization of Fuels

The Development and Commercial Application of Selective Hydrodesulfurization Technology for FCC Gasoline to Produce GB Ⅲ Standard and GB Ⅳ Standard Gasoline

Deep Desulfurization of Fluid Catalytic Cracking Gasoline by Liquid-Liquid Extraction and Photo-Oxidation

Research and Development in Deep Desulfurization of Motor Fuel

STUDY ON THE REMOVAL OF SULFUR COMPOUNDS IN GASOLINE BY SELECTIVE ADSORPTIVE DESULFURIZATION PROCESS

Commercial Application of OCT-M Technology for Selective Hydrodesulfurization of Gasoline

Study on kinetic models for deep hydrodesulfurization of LCO

A molecular-level coupling model of fluid catalytic cracking and hydrotreating processes to improve gasoline quality