Upgrade and Commercial Application of S-RASSG Technology in Production of Ultralow Sulfur Diesel

宋永一,方向晨,郭蓉,刘继华

DOI: https://doi.org/10.3969/j.issn.1671-0460.2013.02.029

2013-01-01

Abstract:To meet the requirement for the production of Euro-Ⅳ and Euro-V clean diesel for refineries, Fushun research institute of petroleum & petrochemicals (FRIPP) has developed FHUDS series catalysts with W-Mo-Ni (Mo-Ni) or Mo-Co as active metals, which have a strong adaptability to different feedstocks. Based on different operating conditions and reaction characteristics of different catalyst beds in running cycle and in consideration of ultra desulfurization mechanisms of different types of catalysts, S-RASSG diesel ultra deep desulfurization technology with different catalyst stack loading has been developed by FRIPP. The commercial application results show that: when S-RASSG catalyst stack technology and its associated FHUDS-2/FHUDS-5 and FHUDS-6/FHUDS-5 catalysts are applied, the high sulfur feed blended with 60% SRGO and 40% LCO, coker diesel or vacuum tower diesel can be processed to stably produce product diesel with sulfur lower than 50×10-6 which meets Guo-Ⅳstandard specifications at reactor inlet pressure of 8.0 MPa, main catalyst LHSV of 1.85~2.25 h-1, and WABT of 350 ℃, etc. The product diesel with less than 10×10-6 sulfur, which meets Euro-Ⅴ standard ,can be produced with feed blended with 70%SRGO, 30%vacuum tower diesel and a small quantity of coker diesel under the conditions of reactor inlet pressure of 8.0 MPa, main catalyst LHSV of 1.85 h-1,WABT of 350 ℃, etc. S-RASSG catalyst stack technology has provided a strong technology support for production of Euro-Ⅳ and Euro-Ⅴdiesels for refineries..