Abstract:Five-axis flank milling has been widely used in industry because of its high material removal rate, low tool loss, and achievement of good surface quality. The cutting force, which is the basis for studying the milling process, is mainly determined by the cutting coefficients, spindle speed, feed rate, and cutter-workpiece engagement (CWE). However, due to the complex spatial motion of the cutting tool, extracting the CWE with high precision and efficiency in five-axis flank milling has become a challenging topic. This paper proposes a novel and integrated solid-discrete-based method to identify the CWE data in a flank milling workpiece with ruled surfaces. In this method, the tool path and cutting location source (CLS) file of certain tool/workpiece combinations are obtained by commercial CAM software. Two cutting types, first cut and following cut, are considered. First, the point cloud data of the machining surface are extracted, and the instantaneous contact profile of the tool and the workpiece is obtained according to the tool geometry information at different cutting location points. The feasible contact surface is then constructed based on an analysis of the surface normal and instantaneous feed direction at the arbitrary tool point. After trimming the contact profile by the feasible contact boundary, the exact CWE can finally be extracted. Compared with the existing methods for CWE extraction, the proposed method replaces the solid model with discrete coordinate points in the calculation process and is thus more suitable for system integration. Experiments and applications show that this method has high accuracy and computational efficiency.

On A Novel Approach to Planning Cylindrical Cutter Location for Flank Milling of Ruled Surfaces

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

Non-singular tool path planning by translating tool orientations in C-space

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Tool path planning for five-axis flank milling of free-form surfaces

A novel tool-path generation method for five-axis flank machining of centrifugal impeller with arbitrary surface blades

Tool-path planning based on iso-scallop for plunge milling in pocket walls manufacture

Simulation Efficiency Optimization Method of Flank Milling for Nondevelopable Ruled Surface Based on Cutting Contact Conditions

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

Exploratory Study of Spiral Nc Tool Path Generation on Triangular Mesh Based on Local Subdivision

Tool Orientation Sequence Smoothing Method Based on the Discrete Domain of Feasible Orientations

The Tool Paths Generation Approach Based on Level-Set Methods in Die-Cavities NC Machining

Iso-Scallop Controlled Tool Path Generation for Free-Form Surfaces Based on Level Set Method

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

A solid-discrete-based method for extracting the cutter-workpiece engagement in five-axis flank milling

An Optimisation Algorithm for Reducing the Number of Turns on Space-Filling Curve Toolpath for Sculptured Surface Milling

Iso-Parametric Tool Path Planning for Five-Axis Compound Surface Machining

Smooth Fillet-End Cutter Tool Path Generation Method on Triangular-Mesh Surface Based on Modified Butterfly Subdivision

Envelope Surface Modeling and Tool Path Optimization for Five-Axis Flank Milling Considering Cutter Runout

A NEW TOOL PATH PLANNING MODEL OF COMPUTER AIDED MANUFACTURING (CAM) FOR FREEFORM SURFACES

Elliptical Model for Surface Topography Prediction in Five-Axis Flank Milling