Abstract:Absorbent materials are being developed to replace semiconductor materials such as p-type silicon, GaAs, CdTe, and quaternary compounds such as CIGS (copper indium gallium selenide). Cu2O is a potential candidate because it is non-toxic, inexpensive, an abundant compound in the Earth's crust, and has good optical properties, such as a high absorption coefficient. In this work, Cu2O was obtained simply by reducing Benedict's solution with glucose in an alkaline medium (pH 10.2 ± 0.2) at 65°C. The samples were synthesized by varying glucose content from 1 g to 7 g. The results showed a phase proportion variation between 95.56% and 99.50% of the Cu2O phase. It was found that the changes in crystallite size, microstrains, particle size, and morphology are due to reaction times, which were influenced by the use of different glucose amounts. The use of a higher glucose amount in the synthesis favors a faster reaction, forming smaller crystallites with more microstrains. Lower glucose amount leads to a slower reaction giving the crystallites more time to grow, which relaxes the microstrains. When increasing glucose content, the obtained morphologies changed from cubes, irregular cubes, prismatic spheres, cauliflower-like, to spherical shapes. The XPS spectra confirmed only the presence of chemical species such as Cu(I) and Cu(II), and chemical defects, such as oxygen vacancies (Vo), were detected in the samples. All samples presented a broad absorption range from 200 nm to 570 nm indistinctly of the morphology. The band gap showed an insignificant change from 2.04 eV to 2.09 eV when glucose was increased from 1 g to 7 g. The in-situ phase transformation study was analyzed from 25°C to 700°C. The results indicated a phase transition from Cu2O to Cu and CuO when the temperature was above 280°C.

Preparation of Micron Size Cuprous Oxide Powder from Acidic CuCl2 Etchant Waste Solution

The Convenient Preparation of Porous CuO Via Copper Oxalate Precursor

Preparation of Cuprous Oxide Particles of Different Crystallinity

A Simple Method for the Preparation of Cu2O with Different Morphologies in High Reaction Concentrations

Obtaining nanoparticles of Cu2O by means of a pulsed discharge of CH3CH2OH-N2

Preparation of CuO Nanorods for Lithium-Ion Battery Anodes by Supercritical Hydrothermal Reaction of Spent Acidic Etchant

Method for preparing antioxidated superfine copper powder

In Situ Preparation of CuCl Cubic Particles on the Commercial Copper Foil: Its Significant Facilitation to the Electrochemical Performance of the Commercial Graphite and Its Unexpected Photochromic Behavior

Preparation of Cu2Y2O5 by Sol-Gel Method and Its Photocatalytic Activity

[Study on Preparation of CuO/Cu2 (oh)3cl Powder and Its Spectrum Behavior for Photodegradation Decoloration of Dyes].

Preparing of Ultrafine Copper Powder by Slurry Electrolysis

Production of Fine Copper Powder Based on the Theory on Preparation of Monodispersed Particles. Production of fine copper powder by disproportionation reaction of cuprous sulfate solution (2nd Report).

A simple method for the preparation of Cu 20 with different morphologies in high reaction concentrations

Preparation of Ultrafine Cu 2 O Powders with Different Morphologies from Cu(OH) 2 Gel

A novel wet-chemical method of preparing highly monodispersed Cu2O nanoparticles

Preparation of Ultrafine Copper Powder with Copper Concentrate

Evolution of Structural and Optical Properties of Cuprous Oxide Particles for Visible Light Absorption

Preparation of Cu_2O Nanocubes by Using PEG as Reducing Agent

Facile synthesis of cubic cuprous oxide for electrochemical reduction of carbon dioxide

Rapid preparation and photocatalytic properties of octahedral Cu2O@Cu powders

One-Pot Fast Synthesis of Leaf-Like CuO Nanostructures and CuO/Ag Microspheres with Photocatalytic Application