Abstract:Severe dendrite growth, low coulombic efficiency and huge volume change have impeded the practical application of Li metal anodes, and the construction of porous scaffolds is an effective strategy to stabilize Li metal. Herein, copper oxide (CuOx) is coated in situ on a unique biporous Cu scaffold (CuOx@Cu) through direct thermal oxidation. CuOx with strong lithiophilicity, confirmed by DFT calculations and experiments, can greatly decrease the nucleation barrier and increase the nucleation sites of Li metal. The reactions of CuOx with Li form Li2O, which can reinforce the SEI films and regulate ion distribution. Biporous Cu with vertical microchannels and interconnected pores, derived by the phase inversion method, can dissipate local current density and improve the uniformity of Li deposition. As a result, CuOx@Cu demonstrates a nucleation overpotential of 5 mV and a high coulombic efficiency of 98.8% over 520 cycles at 1 mA cm(-2), outperforming most of the reported scaffolds. Symmetric cells with CuOx@Cu exhibit much prolonged lifespans and reduced hysteresis in both ether-based and carbonate-based electrolytes. Furthermore, full cells with LiFePO4 cathodes or LiNi0.7Co0.1Mn0.2O2 cathodes exhibit excellent long-term cycling stability and rate capability, demonstrating great compatibility with the current industry and promoting the practical application of Li metal batteries.

Preparation of CuO Nanorods for Lithium-Ion Battery Anodes by Supercritical Hydrothermal Reaction of Spent Acidic Etchant

In-situ Imaging Electrocatalysis in a Solid-State Li-O2 Battery with CuSe Nanosheets As Air Cathode

Synthesis of different CuO nanostructures from Cu(OH)2 nanorods through changing drying medium for lithium-ion battery anodes

Cu Nanoparticles Derived from CuO Electrodes in Lithium Cells

Hydrolysis-Coupled Redox Reaction to 3D Cu/Fe3O4 Nanorod Array Electrodes for High-Performance Lithium-Ion Batteries

Hydrothermal Synthesis of Peony-Like CuO Micro/nanostructures for High-Performance Lithium-Ion Battery Anodes

<i>In situ</i> coating of a lithiophilic interphase on a biporous Cu scaffold with vertical microchannels for dendrite-free Li metal batteries

The Synergetic Effect Induced High Electrochemical Performance of CuO/Cu2O/Cu Nanocomposites as Lithium-Ion Battery Anodes

Cu Doped V2O5·xH2O Nanostructures for Rechargeable Lithium Batteries

Cu Doped V(2)O(5)Center Dot Xh(2)O Nanostructures For Rechargeable Lithium Batteries

Template-assisted synthesis of CuO hollow nanotubes constructed by ultrathin nanosheets for lithium-ion battery applications

Preparation and electrochemical performances of cubic shape Cu2O as anode material for lithium ion batteries

Zno Nanorods Grown Directly on Copper Foil Substrate As A Binder-Free Anode for High Performance Lithium-Ion Batteries

Facile Synthesis of Porous CuO/GO Nanosheets for High-Performance Lithium-ion Battery Anodes

Vertically Aligned Lithiophilic CuO Nanosheets on a Cu Collector to Stabilize Lithium Deposition for Lithium Metal Batteries

Controllable Synthesis of CuO and Its Electrochemical Performances As Anode in Li-ion Batteries

Fabrication of CuO film with network-like architectures through solution-immersion and their application in lithium ion batteries

Dandelion-like Hollow Microspheres of CuO As Anode Material for Lithium-Ion Batteries

Commencing an Acidic Battery Based on a Copper Anode with Ultrafast Proton‐Regulated Kinetics and Superior Dendrite‐Free Property

Preparation of Advanced CuO Nanowires/Functionalized Graphene Composite Anode Material for Lithium Ion Batteries

Self-assembled synthesis of hierarchical nanostructured CuO with various morphologies and their application as anodes for lithium ion batteries