Abstract:Vibration shaker testing is a great tool of validating the vibration fatigue performance of automotive components & systems. However, the representative vibration schedule requires a pre-knowledge of the acceleration history for the test object, which usually is not available until the later development phase of a vehicle program when physical properties are available. Sometimes, a generic vibration schedule developed from the worst-case loading profiles are used with risk of lacking correlation with later full vehicle durability test such as Road Test Simulator (RTS) or Proving Ground (PG) road test due to the higher loading amplitude. This paper proposes a virtual accelerometer approach to collect acceleration responses of a component from a virtual vehicle model. First, a multiple body dynamic model will be produced for virtual load calculation over a series of digitalized virtual proving ground road profiles. These loads will be then applied on the virtual vehicle CAE model with all representative components & subsystems. Acceleration response for the system of interest is then extracted from modal transient dynamic analysis. Later, the acceleration history is converted to frequency domain, and the associated spectral damage calculation is conducted. The final vibration profile is developed based on the equivalent damage concept. The virtual acceleration acquisition and physical acceleration acquisition show good agreement in both time domain and frequency domain. The profile generated from virtual acceleration acquisition covers very well for the physical acceleration acquisition. Overall, virtual acceleration-based profile ensures the conservative shake test results for the example studied. Compared to the physical accelerometer, the virtual accelerometer can provide acceleration data economically and quickly in the early phase of the product development. The proposed approach will ensure the component shaker test is conducted using the meaningful and representative vibration load.

Research and Produce of Vibration Test Bed for Caterpillar Vehicles Based on Typical Sinusoidal Road Surface

Vibration characteristics and isolation in vibration-sensitive areas under moving vehicle load

Design of tractor vibration testing system

Environmental vibration induced by vehicle in complicated field

The Application of Sensitivity Method in Vehicle Dynamics Analysis

The Design of the Virtual Testing System of Vehicle Vibration Based on VR

Research of Intensified Test on Fatigue Property of Automobile Driving Axle Based on Random Load Spectrum

A Research on the Resistance Simulation Method for Multi-axle Vehicle Driving on Complex Road

The testing and improving of the heavy truck vibration

Research on the Online Measurement of Automobile Engine Speed Based on Vibration Analysis

Virtual Accelerometer Approach to Create Vibration Profile for Automotive Component Shake Test

Modeling and analysis of the vibration characteristics of a new type of in-arm hydropneumatic suspension of a tracked vehicle

Low-Cost Portable Road Smoothness Testing Method Based on Pseudo-Vibration Velocity Range

Optimization and testing of suspension system of electric mini off-road vehicles

Study of Ground Vibration from Trains Caused by Track Irregularities

Research on the Method of Whole Vehicle Load Spectrum Compilation Based on Road Surface irregularity

Feasibility Research on Road Response Spectrum Testing of Tracked Vehicle

A novel method for evaluating asphalt pavement structural performance based on vehicle vibration

Investigation of dynamic characteristics for road vehicle based on multiple-input multiple-output vibration test

Simulation and Experimental Study on Vehicle Ride Comfort Based on Topological Structure Analysis

Study and Simulation of Vehicle Suspension System