Abstract:Co-Cu exhibits a metastable miscibility gap in the region of the undercooled melt. Specimens have been undercooled and solidified containerlessly into the metastable miscibility gap in an electromagnetic levitation facility (EML) and in drop tube (DT) experiments. Due to the high undercooling the velocity of the solidification front is very high and the microstructure is frozen in instantaneously. The microstructure of samples processed in the EML is influenced by the electromagnetic stirring due to the induction of electrical currents into the melt. A variety of microstructures has been observed. After undercooling below the binodal the liquid melt separates into the Co-rich L1-phase and the Cu-rich L2-phase. Two basic morphologies of the L1-phase can be observed, they can be attributed to the transition in dendrite growth from diffusionally and thermally controlled to only thermally controlled growth. Transient microstructures are observed after solidification in the vicinity of the binodal. Drop tube experiments, which lead to a rapid solidification of a distribution of droplets under reduced gravity conditions, in contrary allow for the observation of the early stages of demixing: the microstructure shows a homogeneous distribution of spherical particles of the n-ltinority phase in the droplets. The cooling rate of the droplets and its dependence on the droplet radius has been calculated. The solidification velocity as a function of undercooling has been measured in the EML for the composition Co-18.8at%Cu. The data are analysed in the framework of the LKT/BCT model with a velocity-dependent distribution coefficient as well as within a model of Galenko and Danilov using a kinetic growth coefficient of mu=0.22 m/Ks.

Microstructure Evolution and Solidification Kinetics of Undercooled Co–Ge Eutectic Alloys

Rapid Eutectic Growth in Undercooled Al-Ge Alloy under Free Fall Condition

Microstructural characterization of cobalt–antimony eutectic alloy droplets solidified in drop tube

Containerless rapid solidification of highly undercooled Co-Si eutectic alloys

Dynamics of Solidification and Microstructure Evolution in Undercooled Co-Cu-Alloys with Metastable Miscibility Gap

Solidification characteristics of highly undercooled Ag-Ge eutectic alloys

Rapid Solidification Behaviour of Ag–Cu–Ge Ternary Eutectic Alloy

Microstructure Evolution of Dendrite and Eutectic in Undercooled Al70ge30 Alloy

Phase Constitution and Solidification Characteristics of Undercooled Ag-Cu-Ge Ternary Eutectic Alloy

Formation Mechanism of the Primary Faceted Phase and Complex Eutectic Structure Within an Undercooled Ag–Cu–Ge Alloy

Rapid Crystallization and Growth Mechanisms of Highly Undercooled Ag–Cu–Ge Ternary Alloy

Metastable Phase Separation And Rapid Solidification Of Undercooled Co40fe40cu20 Alloy

Microstructural Characteristics of Ni-Sb Eutectic Alloys under Substantial Undercooling and Containerless Solidification Conditions

Microstructure evolution of undercooled iron–copper hypoperitectic alloy

Ternary eutectic and peritectic solidification of undercooled liquid Fe–Mo–Si alloys

Non-equilibrium solidification of bulk undercooled Ni–P eutectic alloys

Competitive Nucleation and Rapid Growth of Co-Si Intermetallic Compounds During Eutectic Solidification under Containerless Processing Condition

Metastable Phase Separation and Rapid Solidification of Undercooled Co-Cu Alloy under Different Conditions

Metastable Phase Separation and Rapid Solidification of Undercooled Co 40 Fe 40 Cu 20 Alloy

Rapid Solidification of Undercooled Cu–Ge Peritectic Alloy

Microstructure Formation Mechanism of Rapidly Solidified Ternary Co-Cu-Pb Monotectic Alloys