Abstract:Using cobaloxime boron fluoride (COBF) and AIBN as catalyst and initiator respectively, the catalytic chain transfer bulk polymerization of 2-hydroxyporpyl methacrylate ( HPMA) was carried out at 60 degrees C and the low molecular weight polymer with a terminal double bond was prepared. The evolution of the apparent chain transfer constant (C-S(spp)) of COBF during the polymerization was determined by the Mayo equation and the CLD (chain length distribution) equation respectively. At the beginning of the reaction the chain transfer constant showed values of up to about 2000, but with the increasing of the monomer conversion, the chain transfer constant decreases and keeps at a value of about 600 for sometime and then decreased again. The most likely cause for the catalyst deactivation is the stable cobalt-carbon bond formed at the first period of the reaction and then reached equilibrium point. When the polymerization proceeds up to middle and high conversion, the chain transfer polymerization is further manipulated by diffusions of polymeric propagating chain and catalyst molecules, and the apparent chain transfer constant fell to value of below 300. It has been found also, that the data determined by the CLD equation are usually lower than those by the Mayo equation, especially at high conversion stage. It is because that both original equations are available for the instantaneous produced polymer or the case of very lower conversion stage. However, the GPC measurements give molecular weight distributions of the cumulated products rather than the instantaneous produced polymer. The number-average polymerization degrees for the instantaneous produced polymers were obtained from the GPC data, and used in the Mayo equation method together with the modification of the monomer concentration. It was believed that the apparent chain transfer constants from the modified Mayo equation method are more available for the middle and high conversion cases.

Monitoring dispersion polymerisations of methyl methacrylate in supercritical carbon dioxide

Online Monitoring Of Drop/Particle Size And Size Distribution In Liquid-Liquid Dispersions And Suspension Polymerizations By Optical Reflectance Measurements

In Situ Polymerization of Poly(methyl Methacrylate)/clay Nanocomposites in Supercritical Carbon Dioxide

Preparation of Cross-Linked Microparticles of Poly(glycidyl Methacrylate) by Dispersion Polymerization of Glycidyl Methacrylate Using a PDMS Macromonomer As Stabilizer in Supercritical Carbon Dioxide

Dispersion Polymerizations of Methyl Methacrylate in Supercritical Carbon Dioxide with A Novel Ester End-Capped Perfluoropolyether Stabilizer

Microscopic Spacial Effect on the Dispersion Polymerization in Scco2

Dispersion Catalytic Chain Transfer Polymerizations of Methyl Methacrylate in Supercritical Carbon Dioxide

THE EVOLUTION OF THE CHAIN TRANSFER CONSTANT DURING THE CATALYTIC CHAIN TRANSFER POLYMERIZATION OF 2-HYDROXYPROPYL METHACRYLATE

Dispersion Atom Transfer Radical Polymerization of Vinyl Monomers in Supercritical Carbon Dioxide

Numerical Simulation on Solvent Diffusion during Polymeric Coating Curing Processes

On-line Fast Detection and Control of Composition for Binary Gas-Phase Copolymerization of Olefins

In-Situ Heterogenous Polymerization of Methyl Methacrylateonto Nanometer Calcium Carbonate Particles

High molecular weight graft stabilisers for dispersion polymerisation of vinylidene fluoride in supercritical carbon dioxide: the effect of architecture

Dispersion Polymerization of Vinylidene Fluoride in Supercritical Carbon Dioxide Using a Fluorinated Graft Maleic Anhydride Copolymer Stabilizer

Supported ATRP of Fluorinated Methacrylates in Supercritical Carbon Dioxide: Preparation of Scco2 Soluble Polymers with Low Catalytic Residues

Dissolution of Polymer Films in Supercritical Carbon Dioxide Using A Quartz Crystal Microbalance

Dispersion Polymerization in Supercritical CO2

New Insight into the Action of Supercritical Carbon Dioxide for Grafting of Maleic Anhydride Onto Isotactic Polypropylene by Reactive Extrusion

Thermal Safety and Overall Kinetics for Methyl Methacrylate Solution Polymerization via On-line Process Analytical Technology

"Living" Polymer Beads in Supercritical Co2

Analysis of a dimethacrylate copolymer (bis-GMA and TEGDMA) network by DSC and 13C solution and solid-state NMR spectroscopy