Abstract:The increasing demand for enhanced performance and reliability in twin-screw compressors necessitates the application of advanced optimisation tools to improve performance. This study employs response surface methodology (RSM) to optimise the profile parameters of a standard 5/6 compressor, specifically targeting reductions in specific power. Key factors such as axis distance between rotors and female rotor outer diameter, which define the rotor depth, are included in the optimisation process.Following the optimisation of the rotor profile, port optimisation was also conducted using the same methodology. A multi-chamber thermodynamic analysis was performed with SCORGTM software, which allowed for the calculation of geometric values and thermodynamic quantities. The results of the rotor optimisation revealed notable improvements: a 4.30% reduction in specific power, a 2.73% increase in volumetric efficiency, a 3.93% enhancement in adiabatic efficiency, and a 2.88% rise in volumetric flow rate compared to the reference design. After port optimisation, both volumetric and adiabatic efficiencies of the optimised rotor profile remained comparable, while specific power was further reduced by 1.37%.To validate the performance of the optimised compressor, computational fluid dynamics (CFD) analysis was conducted using a conformal mesh generated by SCORGTM and ANSYS CFX multiphase solver. The maximum deviation between the optimal results from SCORGTM and CFD was only 0.19%, indicating strong agreement between the two methodologies. This study highlights the significant impact of optimisation techniques on the performance of twin-screw compressors.

Structure and Theory for a Taper Twin Screw Compressor

A Mathematical Model Of Movable Component In Single Screw Compressor

Research on Characteristics of Twin-screw Refrigeration Compressor

Geometric Theory for a Translational Rotary Compressor

Research and Development on Design Theory and Key Technology of Screw Compressors

Research on Structural Parameter Optimization and Thermal Performance of Twin-Screw Expander

The Design of a Twin-screw Compressor Based on a New Rotor Profile

Status and Hot Spot of Twin Screw Compressor

Experimental Analysis of Pressure Distribution in a Twin Screw Compressor for Multiphase Duties

Analytic Method for Computing Axial-flow Compressor and Turbine Characteristics

Geometric model and pressurization analysis on a novel sliding vane compressor with an asymmetrical cylinder profile

Numerical Simulation of the Working Process in the Twin Screw Vacuum Pump

Optimal Structural Design of Swing Double- vane Rotary Compressor

A Theoretical Study on the Novel Structure of Vane Compressor for High Efficiency

Analysis of Performance of Two-Stage Screw Compressor under Various Operating Conditions

Working characteristic modeling and analysis for single screw compressor with multicolumn envelope meshing pair

Affect of Geometry Parameters on Performance of Single Screw Compressor

Experimental study and model optimization of thermodynamic performance of a single screw water vapor compressor

Design Optimisation of a Screw Compressor with a Focus on Rotor Depth: A Computational Fluid Dynamics Approach

Optimization of Twin Screw Compressor with a Software Package

Principle of Multi-Column Envelope Couple of Single Screw Compressor