Abstract:Modifications of three thermosets(epoxy resins,cyanate ester and bismaleimide resins) with 4 kinds of polyetherimide(PEI):PID,PIM,PIP and PIB were studied,effects of the structure,content and molecular weight of PEI and curing temperature on the performance of the modification systems were discussed in terms of morphology and mechanical properties.It could be concluded that controlling the phase structure was the key factor to obtain high performance matrix resins of advanced composite.For the different kind of thermosetting resin,the structure,content molecular weigh of PEI and its curing temperature should be different,TGDDM/PIM syetem showed double continuous phase structure.For the PEI modified bismaleimide,when content of PEI was 5%,it showed that the PIM particle was dispersed in BMI;when content of PEI was 10%,it showed double continuous phase structure and when content of PEI was more than 15%,it showed phase inverst structare.For the PIP modified epoxy resin system,when molecular weight M_n of phenyl terminal PIP was 20 000 and when M_n of amino terminal PIP was 18 000,it showed phase inverst structure and when M_n of phynyl terminal PIP was 15 000 it showed double continuous phase structure.Fore the PIP modified cyanate ester,when the M_n of PIP was lower,it showed double continuous phase structure,when curing temperature was 120 ℃ it showed phase inverst structure and when curing temperature was 150 ℃ and 180 ℃,it showed double continuous phase and the toughening effect was obvious meanwhile.

Study on the synthesis and properties of thermosetting PF resins

Preparation of glass fiber reinforced phenolic injection molding materials and its properties

Effect of weight ratio of thermoplastic and thermosetting boron-containing phenolic resin on mechanical, bonding, and ablative properties of thermal insulating composites

Molecular simulation on the rheological properties of phenolic resins during crosslinking

Study on the Curing Behavior of Polythiol/phenolic/epoxy Resin and the Mechanical and Thermal Properties of the Composites

Study of Phase Transition, Structure Modulation, and Thermal Properties of Si/B-modified Bisphenol a Phenolic Resin Ceramicizable Materials

Synthesis and Mechanical Properties of Polyacrylic Acid Resin Retanning Agent

Effect of chemical structure and cross-link density on the heat resistance of phenolic resin

Study on Interfacial Structure and High Temperature Mechanical Properties of Cf/Ppek and Cf/Ppes Composites

Effect of melting temperatures on the orientation and rheology of polyacrylate/silica (PAcr/SiO2) composite microspheres in twin‐screw extruder

Thermal Treatment Effects on Structure and Mechanical Properties of Polybutylene Terephthalate and Epoxy Resin Composites Reinforced with Glass Fiber

Influence of Resin Molecular Weight on Curing and Thermal Degradation of Plywood Made From Phenolic Prepreg Palm Veneers

Film forming technology and properties of modified resole phenolic resin via hot-melt method

STUDY ON THE TETRAMALEIMIDE MODIFICATION POLYPHENYLMENTHYLSILOXANE PHENOLIC RESIN

Study on Toughening of Matrix Resins for Advanced Composite

Preparation of high molecular weight thermoplastic bio-based phenolic resin and fiber based on lignin liquefaction

Thermal Analysis of Anti-ultraviolet Poly(vinylidene fluoride)/Wood Flour Composites

Study on Properties of Heat-Resistant Hybrid Resin Containing Silicon and Composites

Properties of Silicone Resin Modified with Silicone-Acetylene Resin and Its Composites

Study on the effect of the molding process and service temperature on the mechanical properties and low‐velocity impact performance of the ultra‐high molecular weight polyethylene fiber laminates

Phase-Separation Dominating Mechanical Properties Of A Novel Tung-Oil-Based Thermosetting Polymer