Abstract:The damage caused by soil liquefaction during earthquakes is substantially affected by the total volume and spatial distribution of the liquefied soils. Therefore, a proper characterization of the spatial distribution of liquefaction potential of subsurface soils plays a critical role in earthquake hazard assessment and mitigation. In engineering practice, in situ tests, such as the cone penetration test (CPT), are widely used for evaluating soil liquefaction potential through, e.g., factor of safety (FS) against liquefaction, and the results of liquefaction assessment in a cross-section are needed for subsequent earthquake hazard analysis and mitigation. Traditional simplified methods only provide the liquefaction potential of soils at individual locations, and the results of liquefaction triggering evaluation at individual locations are often used to represent the whole site. This might lead to an unconservative estimation of earthquake-induced deformations and damage at a site where spatial variation of soil properties is significant. In addition, although CPT provides almost continuous sounding along vertical direction, measurements along horizontal directions are usually limited. This leads to the difficulty in proper application of geostatistical methods in liquefaction potential analysis. To address these challenges, a nonparametric and data-driven method is developed in this study to interpret a cross-section of FS with high spatial resolution directly from sparse CPT soundings. Based on the interpreted cross-section of FS, the predicted total volume and spatial distribution of liquefied soils are estimated. Both simulated and real CPT data are used to demonstrate and validate the proposed method, and the results show that the proposed method performs reasonably well.

Probabilistic Evaluation Of Earthquake-Induced Liquefaction Potential For Large Region Site Based On Two-Dimensional Gis Technique

Probabilistic Estimation of Seismic Liquefaction Potential for Large Region Site Based on Two-Dimensional GIS Technique

Probabilistic Estimation of Seismic Liquefaction Potential for 2.5 Dimensional Site Based on GIS

Risk evaluation of earthquake-induced site liquefaction based on 3D GIS

GIS applied in 3D evaluation of earthquake-induced site liquefaction potential

3D Visualization for Earthquake-Induced Site Liquefaction Potential Based on Volume Rendering and GIS Technology

Characterizing the Liquefaction Potential and Pore Pressure Generation of Silty Sands Through the Energy-Based Approach in the Framework of Critical State Soil Mechanics

Liquefaction Analysis By Gis Method

Probabilistic Evaluation of Sand Liquefaction Based on Logistic Regression Model

Delineating the Spatial Distribution of Soil Liquefaction Potential in a Cross-Section from Limited Cone Penetration Tests

Spatial distribution simulation method for liquefaction index probability

Sequential Gaussian simulation predicts soil liquefaction potential

Risk-evaluating System of Seismic Site Liquefaction Based on GIS Technique:A Primary Research

Mapping Probability of Liquefaction Using Geostatistics and First Order Reliability Method Based on CPTU Measurements

Evaluation of SPT-Based Liquefaction Assessment Methods in China

Assessment of Liquefaction-Induced Lateral Spread Using Soft Computing Approaches

A New Equation to Evaluate Liquefaction Triggering Using the Response Surface Method and Parametric Sensitivity Analysis

Probabilistic Liquefaction Assessment Based on an In-situ State Parameter Considering Soil Spatial Variability and Various Uncertainties

Evaluation of sand liquefaction under the GIS environment

Application of the Coupled Markov Chain in Soil Liquefaction Potential Evaluation

Probabilistic Estimation of Sand Liquefaction Based on Neural Network Model of Radial Basis Function